Malting rig build!

[J Dot]

Hello again Guys,
Since we are bringing the rig back!
I cleaned her up a bit, found my original sketches ,
Replaced the traction strips, etc.

Anyhow
If any of you wanna follow me on the rig ( malting ) procedure,
Basically the same as before, BUT instead of malting In a bowl,
It goes into tumbler, until ready to dry! This will be a learning
experience for me as well! Learning to use it correctly!

So
If any of you wish to BUILD A RIG , I’ll supply some pics, parts list,
Dimensions, etc!
If you might want to tackle the build?
I’ll start with my sketches , and the bucket first,
Then I’ll post again , more about the machine!
As we go along!

J Dot
{:0)

The pics:
( as you might see I did a few mods from the sketches, like the cork rings
Around the screens on the bucket ( for ONLY a cleaner look ) not needed
As well as the traction strips, etc )
Feel free to put your own twist on it, or go oak, whatever, just have fun!