Cooling flute stills.

[Stilldrunk]

Just wondering witch configuration everyone is running the water
in lines on their flute / plated column stills.

Cold water split into two with one running to the bottom of the
Deflag and the other running to the bottom of the final product
Condenser?

Then the warm water out flowing from the top of each?

[Bushman]

I am not running a flute but that is the way both of my RC & PC are set up.

[Saltbush Bill]

My plated column works that way.

[bluefish_dist]

On my vm column I ran the pc and Rc in series. Feed5(3 bottom of the pc, then the outlet from the pc to the rc, then back to the tank. If I was using a deflag, I would run them in parallel so I had more control on the deflag without effecting the pc.