flûte 4 "x 36" x 5 plates

[lambert]

Good morning all,
my name is freddy lambert, I am Swiss, I live in Dominican Repubic.
I like distillation, discussions, exchanges of information,
why I registered on the forum

[lambert]

Hi how are you,
I hope that this time, I'm on the right track.
Thanks for your help.

[lambert]

from the beginning of the construction, some pictures of my flute.

[StillerBoy]

You got it freddy.. now we can help you with your flute building..

you may want to start with the pictures you posted in the other thread..

Mars

[lambert]

You got it freddy.. now we can help you with your flute building..

you may want to start with the pictures you posted in the other thread..

Mars

OK, thanks

[lambert]

[img][attachment=2]my parrot.jpg[/attachment][/img][attachment=1]bride facil.jpg[/attachment][attachment=0]coude cuivre.jpg[/attachment]

[lambert]

still a little fun !!!
cutting glasses,
in a tube L of 2 "pinch to the wind, cut bevel saw bell
4 1/8

[pope]

Yea man! Excited to see the build progress!

[lambert]

[attachment=0]lunettes de vue.jpg[/attachment]

[lambert]

[img][quote][img][img][img][img][url][*][/url][/img][/img][/img][/img][/quote][/img]

[DetroitDIY]

Looks like a nice start Freddy.

[lambert]

Looks like a nice start Freddy.


thank you very much,
yes I take a lot of pleasure to build, I hope that this beast will not be too difficult to control

[lambert]

[img][img][attachment=0]lunettes de vue.jpg[/attachment][/img][/img][quote][url][img][/img][/url][/quote][quote=lambert post_id=7578104 time=1572740276 user_id=75254]
[img][quote][img][img][img][img][url][*][/url][/img][/img][/img][/img][/quote][/img]
[/quote]

[lambert]

eyeglasses, bevel with 4 "1/8 hole saw, weld on 2" ferrules,
ready to weld on the tube 4 "

[lambert]

eyeglasses, bevel with 4 "1/8 hole saw, weld on 2" ferrules,
ready to weld on the tube 4 "

[Saltbush Bill]

You will be happier with the end result if you make those sight glass mounts shorter......the longer they are the less you can see of whats going on in the column. As short as you can get them is best.

[lambert]

You will be happier with the end result if you make those sight glass mounts shorter......the longer they are the less you can see of whats going on in the column. As short as you can get them is best.

ok, the next column, I cut shorter

[DetroitDIY]

'...next column...'

[lambert]

eyeglasses, bevel with 4 "1/8 hole saw, weld on 2" ferrules,
ready to weld on the tube 4 "

tube copper.jpg

some pictures of the bevel cut,

[lambert]

eyeglasses, bevel with 4 "1/8 hole saw, weld on 2" ferrules,
ready to weld on the tube 4 "

tube copper.jpg

some pictures of the bevel cut,

coupe des biseaux.jpg

[lambert]

oday I drilled the plates, 180x 5 = 900 holes 3 drills 1/16 breaks and grease spray

[pope]

Haha ‘next column’ - good to know you’re a realist.

[lambert]

oday I drilled the plates, 180x 5 = 900 holes 3 drills 1/16 breaks and grease spray

[Yummyrum]

Looking good Lambert .
Thats a good number of holes and size ..... should work well for you .
Tend to agree with Saltbush bill about the longer sight glass ports limiting vision , but if all you want to see is straight ahead , you’ll be just fine .

Pleased to see you getting the hang of the [ quote ][ quote][ img ][ img][ url ][ url][/img ][. img] stuff

[lambert]

oday I drilled the plates, 180x 5 = 900 holes 3 drills 1/16 breaks and grease spray

assiettes.jpg

[lambert]

Hello everyone,
my plates polisch, I will be able to mount mo tree removable, descent 3/4, spacees 5 "1/2 stem filtee stainless steel 6mm

[lambert]

here is my 5-plate tree mount
the plates go to milimeter

[lambert]

[quote=lambert post_id=7578447 time=1572992864 user_id=75254]
here is my 5-plate tree mount
the plates go to milimeter
[/quote]
[img][url][attachment=0]arbre de 5 plaques perforees.jpg[/attachment][/url][/img]

[lambert]

[quote=lambert post_id=7578447 time=1572992864 user_id=75254]
here is my 5-plate tree mount
the plates go to milimeter
[/quote]
[img][attachment=0]les assiettes passe au milimetre.jpg[/attachment][/img]

[lambert]

Hello,
the plates go to the millimeter inside the tube 4 ".
I go inside the netoye tube.
I will post a photo.