Just wanted to say hello. I’m an experienced beer/cider/wine maker, and have a good amount of all grain under my belt for beer. I have learned a ton reading and excited to get my setup complete.
So far I have my keg set up with a 5500watt ulwd element, controller, and a pot still head on the way from mile hi. Wish I would have done all this reading before pulling the trigger on purchasing the top, as it would have been fun and relatively easy to make, but the ease of use getting started is nice.
No big holes cut in the keg for cleaning or anything, because I don’t see how I can’t just rinse with a hose to clean. Correct me if I’m wrong.
Planning on a sugar wash for a sacrificial run and jumping to booners all corn from there. Will keep you all updated (as I’ve read all about the trouble with corn). Only sticky spot I foresee (no pun intended) is separating liquid from corn after ferment.
Hello from the sunshine state
Moderator: Site Moderator
-
SassyFrass
- Distiller
- Posts: 1203
- Joined: Mon Dec 22, 2014 8:54 am
- Location: Sittin' on the side of the Mountain sippin' and smilin'
Re: Hello from the sunshine state
Hello and welcome to HD. You said it. A pot still and/or thumper can be assembled from off the shelf parts pretty easily. Have fun and be safe.
SF
SF
Simple Lil' Pot Still, no temp guage, no carbon, no scrubbers, nuthin' fancy. Sometimes use a thumper, sometimes don't.
Real good info for New Folks:
Real good info for New Folks:
-
Cracker_Red52
- Novice
- Posts: 7
- Joined: Wed Feb 03, 2021 7:08 am
Re: Hello from the sunshine state
Hello neighbor from the not so warm state today 
-
Saltbush Bill
- Site Mod
- Posts: 10364
- Joined: Thu Mar 17, 2011 2:13 am
- Location: Northern NSW Australia
Re: Hello from the sunshine state
Welcome aboard Bigdog.
Your not wrong.......just rinse and run again.
Your not wrong.......just rinse and run again.
Re: Hello from the sunshine state
Good to know saltbush, thought I was missing something with all the modifications I’ve seen on some of the keg stills.
Cracker, I am loving this weather! Wish it would stay this way all year.
Thank you for all the welcomes!
Cracker, I am loving this weather! Wish it would stay this way all year.
Thank you for all the welcomes!
Re: Hello from the sunshine state
Welcome big_dog. Quite a few of us here in Florida
-
Saltbush Bill
- Site Mod
- Posts: 10364
- Joined: Thu Mar 17, 2011 2:13 am
- Location: Northern NSW Australia
Re: Hello from the sunshine state
Heavily modified kegs seems to have evolved in relatively recent times, Lots of us kept it simple in the beginning and just ran standard keg. Was quite a while before I even had the luxury or a drain .....the novelty of dragging 3/4 full kegs out side to upend them on the lawn when its time to empty the hot slops wears thin fairly quickly.
Ripper weather for sure, loving it here too.
Is Florida known as the Sunshine State too ?
Re: Hello from the sunshine state
Is Florida known as the Sunshine State too ?
[/quote]
What other state is known as the sunshine state?
I was thinking about moving the keg around with hot water in it. Weight shouldn’t be an issue with those handy grips on kegs, but an extra 50$ at the welders would save hassle and lessen the risk of a few burns.
Starting to see the appeal of all those mods now.