Forum for the discussion of any material/synthetics.Only posts with info /or links to research info allowed . Any posts recommend the use of any material without copy's or links to show proven research will be deleted
Hi all I'm currently building my keg pot still and would like to do it all myself. I've built the condenser and modified my keg with 2" hole for ferrule and heater and 4" cleaning port at the top.
Now I've never welded anything so me doing it is out the question but I can solder and I've read silver soldering may be ok (staybrite .
I'd like everyone's opinions if you don't mind on the pros and cons of using this silver solder on stainless to stainless and also stainless to copper
.