Question about personal experience on average run time

A MUST READ FORUM Place where new distillers can read many of the important documents that help introduce them to distilling. This is a read-only forum.

Moderator: Site Moderator

Post Reply
Hybrid pot still
Swill Maker
Posts: 187
Joined: Sun May 30, 2021 7:11 pm

Question about personal experience on average run time

Post by Hybrid pot still »

So my question is on a pot still, I'm running a pot that I can run 3 gallons of mash/wash through.. with 3/4" line riser at 10" with a 90 l, still 3/4 for another 18" out horizontally reduces to half inch, with is all OD I believe.. which the half inch continues for another 10" , 90 down to a half inch OD worm with is actually 3/8 I believe which is problem I think, and my problem is it takes me 6 hours on average, 16ozs ever 1½ hours, roughly i can get a 3/4 of a gallon of good liquor from 3 gallons of 18% abv mash I do, 6 hours though?? I feel that this isn't right to some degree, and I've been reading and I've tried mesh because I do see huffing happening i believe at the end of my worm with the liquid going in and out in and out..

This topic has 12 more replies

You must be a registered member and logged in to view the replies in this topic.


Register Login
 
Post Reply