Looking for ciggy packet blueprints!

[Skál]

Currently I run a Boka (prob get an idea of the still from my original posts) and would like to make a dedicated pot still head plus option for gin.I can spend cash on bits and pieces I need but that's easy and like many here making do,modifying and scrounging is as fun as making your own.I have 'some' skills ,half a brain and don't mind fecking up as its all a learning process.If anyone has some input as what I could do using what I currently have it would be greatly appreciated.Scribbles on paper,a few words or will be accepted with gratitude.

Materials: Boka as in first post top of column is approx 40cm bottom 80 cm both with ferrules
114cm 2" copper pipe
Approx 200 cm of 19.1 or 22.2 cm. 3/4 or 7/8 " in roughly 3 pieces
Approx 330 cm of 15.9cm or 5/8 in 3 3ft 90cm or mtr and one 2ft 60 cm
Approx 2 foot 1/4 "
1 2" ss ferrule
6 barbed ferrules for coolant.can easily join to my existing coolant system but sadly not to my produce cooler as I use
a Graham condenser

If you take the time to read this thanks...if you reply thanks even more!I enjoy building etc and happy to try something new as that's half the fun.Having a hard time not just ordering some SS 90 degrees from aliexpress but that's just too easy isnt it? Is it? No....its too easy!ill keep telling myself that!for anyone that reads or even replies thanks again