I recently inherited a brewing/distilling setup. I'm all ready to go for my first mash, then realized that the previous owner was using house pressure for the jet burner. I am not equipped for running the burner from house pressure and want to convert the nozzle fitting for a high pressure 20lb propane tank. The internet has so far failed me in returning any information on how/if this is possible.
In addition to the jet burner, which is currently attached to the stand, I also have a cast iron round burner which is set up for high flow but does not have a stand. I'm hoping that I can either cannibalize the round burner or pickup what I need for the flow conversion relatively cheaply.
Any help would be appreciated. Pics attached.
How to change a jet burner from house pressure (low) to tank (high)
Moderator: Site Moderator
-
snikemyder
- Novice
- Posts: 2
- Joined: Wed Jun 22, 2022 5:42 pm
How to change a jet burner from house pressure (low) to tank (high)
You do not have the required permissions to view the files attached to this post.