Going VM/LM or VM/RLM? Which Type of head would you build?

Vapor, Liquid or Cooling Management. Flutes, plates, etc.

Moderator: Site Moderator

User avatar
Yummyrum
Admin
Posts: 10548
Joined: Sat Jul 06, 2013 2:23 am
Location: Fraser Coast QLD Aussie

Re: Going VM/LM or VM/RLM? Which Type of head would you build?

Post by Yummyrum »

If only one person wrote all the info in this forum , you’d believe it as gospel . That is the feel good you get from a book written by a single author .

However , despite there being at sometimes conflicting thoughts on topics which can leave a beginner feeling unsure and untrusting of the information , this forum has undeniably ,the worlds biggest centralisation of home distilling information and real world application .

This forum also has a dedicated section on Continuous Stills and folks such as Larry who are very experienced and whom you can ask questions ….. something you can’t do when reading a book and get confussed .
User avatar
LWTCS
Site Mod
Posts: 13299
Joined: Mon Jan 26, 2009 6:04 pm
Location: Treasure Coast

Re: Going VM/LM or VM/RLM? Which Type of head would you build?

Post by LWTCS »

In my opinion this forum is a far better resource for continuous distillation relative to what is in Riku's recent addition.
The minimal info there is somewhere between vague and remedial.

I certainly don't mean to sound disparaging as Riku's contributions to the craft are well documented.
Trample the injured and hurdle the dead.
Post Reply