Thinking about converting my column rig to a continuous stripper.

We don’t condone the use of Continuous Stripping stills as a method of running 24/7 as this is a commercial setup only .
Home distillers should never leave any still run unattended and Continuous strippers should not be operated for longer periods than a Batch stripping session would typically be run to minimise operator fatigue..

Moderator: Site Moderator

Post Reply
Southern jeeper
Novice
Posts: 17
Joined: Thu Mar 30, 2017 5:18 pm
Location: Dixie

Thinking about converting my column rig to a continuous stripper.

Post by Southern jeeper »

Currently I have a 12 gallon boiler set up with a 2 inch boka and also a 10 gallon thumper for pot still work and I was thinking I could use a lot of my existing parts from my column set up and reconfigure it to a continuous stripper
image.jpg
This is kinda what I was thinking but I really have no experience with a continuous still so if there are some blatant design issues chime in.
You do not have the required permissions to view the files attached to this post.
Top

This topic has 13 more replies

You must be a registered member and logged in to view the replies in this topic.


Register Login
 
Post Reply

Return to “Continuous Stripping stills”