Zymurgy Bob
Moderator: Site Moderator
Zymurgy Bob
He just cheked in and seems to be in reasonably good health.
He was definitely affected by covid and also must now use a voice activated app in order to type due to failing vision.
Anywho,,,,, for those who care, it's good that he is otherwise doing well.
He was definitely affected by covid and also must now use a voice activated app in order to type due to failing vision.
Anywho,,,,, for those who care, it's good that he is otherwise doing well.
Trample the injured and hurdle the dead.
- Twisted Brick
- Master of Distillation
- Posts: 4126
- Joined: Sat Mar 09, 2013 4:54 pm
- Location: Craigh Na Dun
Re: Zymurgy Bob
Good to hear, Larry. Early on Bob shared with me the process and logic involved in producing his triple-distilled single malt whiskey. I've always respected his approach to the craft and the work he put into his distillery.
Thanks for the update.
Thanks for the update.
“Always carry a flagon of whiskey in case of snakebite, and furthermore, always carry a small snake.”
- W.C. Fields
My EZ Solder Shotgun
My Steam Rig and Manometer
- W.C. Fields
My EZ Solder Shotgun
My Steam Rig and Manometer
- Saltbush Bill
- Site Mod
- Posts: 10460
- Joined: Thu Mar 17, 2011 2:13 am
- Location: Northern NSW Australia
Re: Zymurgy Bob
Thanks for that Larry, I wasn't aware that he has had health issues.
He's always done good things for this hobby and is someone who's information and ideas I've always trusted.
Great to hear that he is doing OK
He's always done good things for this hobby and is someone who's information and ideas I've always trusted.
Great to hear that he is doing OK
- Swedish Pride
- Master of Distillation
- Posts: 2800
- Joined: Tue Aug 26, 2014 2:16 am
- Location: Emerald Isle
Re: Zymurgy Bob
Thanks for the update Larry.
Zbob is a gent, I remember reaching out to him to get his book, he tried to talk me out of it saying it's mainly for beginners, I still got it and I still learnt loads.
Didn't know he was of ill health, hope he's on the mend
Zbob is a gent, I remember reaching out to him to get his book, he tried to talk me out of it saying it's mainly for beginners, I still got it and I still learnt loads.
Didn't know he was of ill health, hope he's on the mend
Don't be a dick
Re: Zymurgy Bob
Within the last few years he was (as he puts it) helping out at a friend's distillery. His health forced him to step aside and slow down.Twisted Brick wrote: ↑Mon Jul 24, 2023 7:30 pm Good to hear, Larry. Early on Bob shared with me the process and logic involved in producing his triple-distilled single malt whiskey. I've always respected his approach to the craft and the work he put into his distillery.
Thanks for the update.
He is now however in the process of writing another book that will be a bit more about the practicalities of what is needed to run a craft distillery. I look forward to its completion. I like his writing style.
Trample the injured and hurdle the dead.
- Swedish Pride
- Master of Distillation
- Posts: 2800
- Joined: Tue Aug 26, 2014 2:16 am
- Location: Emerald Isle
Re: Zymurgy Bob
He's to modest.
From our convictions he was running the distillery while the people who called the shots were unable to find their arseholes even with a mirror on a stick
Apparently he churned out some very good peated malt for them
From our convictions he was running the distillery while the people who called the shots were unable to find their arseholes even with a mirror on a stick
Apparently he churned out some very good peated malt for them
Don't be a dick
- Saltbush Bill
- Site Mod
- Posts: 10460
- Joined: Thu Mar 17, 2011 2:13 am
- Location: Northern NSW Australia
Re: Zymurgy Bob
I thought he owned the distillery on Whidbey Island. It is right on the water and he told me if I brought the boat down he would clean off the dock and I could moor there. Unfortunately I never made it down but when the ADI conference was in Seattle I took him and Carl around the day before it started to different distilleries in the Seattle and Woodinville areas.
- jonnys_spirit
- Master of Distillation
- Posts: 3929
- Joined: Wed Oct 21, 2015 7:58 am
- Location: The Milky Way
Re: Zymurgy Bob
Best health to ZB! If he releases another book I'll order it and I'm not much of a book guy these days...
Cheers,
jonny
Cheers,
jonny
————
i prefer my mash shaken, not stirred
————
i prefer my mash shaken, not stirred
————
Re: Zymurgy Bob
He is evidently only good friends with the Colders Bay folks.Bushman wrote: ↑Tue Jul 25, 2023 6:07 am I thought he owned the distillery on Whidbey Island. It is right on the water and he told me if I brought the boat down he would clean off the dock and I could moor there. Unfortunately I never made it down but when the ADI conference was in Seattle I took him and Carl around the day before it started to different distilleries in the Seattle and Woodinville areas.
He says they have even been able to make some improvements upon what he set them up to produce.
Not suprising. He is a good teacher.
Trample the injured and hurdle the dead.
- Twisted Brick
- Master of Distillation
- Posts: 4126
- Joined: Sat Mar 09, 2013 4:54 pm
- Location: Craigh Na Dun
Re: Zymurgy Bob
After LWTC's original post I was going over some of Bob's old emails and came across this.
https://www.seattletimes.com/seattle-ne ... -among-us/
https://www.seattletimes.com/seattle-ne ... -among-us/
“Always carry a flagon of whiskey in case of snakebite, and furthermore, always carry a small snake.”
- W.C. Fields
My EZ Solder Shotgun
My Steam Rig and Manometer
- W.C. Fields
My EZ Solder Shotgun
My Steam Rig and Manometer
Re: Zymurgy Bob
It's crazy how this stuff works out, I ordered his book last week Making Fine Spirits. Its like when you are looking at parts on the internet and next thing you know its showing up everywhere.
I was talking to someone about needing more reading material and they told me to check it out.
I knew the name sounded familiar from when I first started reading the forums. Or he was at least referenced in some posts.
Its good to know from the way it sounds from all of you guys it should be a very good read and I'm really looking forward to it.
It will be nice to have something read when I'm not able to get online and check out whats happening here.
I was talking to someone about needing more reading material and they told me to check it out.
I knew the name sounded familiar from when I first started reading the forums. Or he was at least referenced in some posts.
Its good to know from the way it sounds from all of you guys it should be a very good read and I'm really looking forward to it.
It will be nice to have something read when I'm not able to get online and check out whats happening here.
- Twisted Brick
- Master of Distillation
- Posts: 4126
- Joined: Sat Mar 09, 2013 4:54 pm
- Location: Craigh Na Dun
Re: Zymurgy Bob
If its coming from ZBob, it will be accurate, relevant and current. Most books I've looked at were a little short on all three attributes.
One only has to read through the archives here to get the required information, although the search functions can be a little challenging.
Enjoy your read.
One only has to read through the archives here to get the required information, although the search functions can be a little challenging.
Enjoy your read.
“Always carry a flagon of whiskey in case of snakebite, and furthermore, always carry a small snake.”
- W.C. Fields
My EZ Solder Shotgun
My Steam Rig and Manometer
- W.C. Fields
My EZ Solder Shotgun
My Steam Rig and Manometer