I was wondering if this copper mesh is better than the copper scrubbers.
Just learned that what I heard in the Boka column was flooding, sounded like there was boiling in the column but it still appeared to work well.
Copper mesh vs Scrubbers
Moderator: Site Moderator
- elbono
- Rumrunner
- Posts: 615
- Joined: Thu Oct 07, 2021 1:05 pm
- Location: Middle Tennessee, USA
Re: Copper mesh vs Scrubbers
That's a bigger question than you probably realize. I think the consensus is you can control the packing density better rolling mesh than you can pushing scrubbers.
Here's an oldie but goodie for your reading pleasure viewtopic.php?t=30727
Here's an oldie but goodie for your reading pleasure viewtopic.php?t=30727
I don't suffer from insanity, I enjoy every minute of it!
- shadylane
- Master of Distillation
- Posts: 12846
- Joined: Sat Oct 27, 2007 11:54 pm
- Location: Hiding In the Boiler room of the Insane asylum
Re: Copper mesh vs Scrubbers
Just a thought.
Copper scrubbers meant for cleaning pots and pans are usually copper plated steel.
Pure copper mesh isn't durable enough for scrubbing with.
I've put a torch to some, that the manufactures claim to be pure copper, but they weren't.
On a side note, what your hearing is most likely the sound of the pot boiling.