Ez mod for liebigs and shotgun condensers.

[Tammuz]

Yesterday I tried to post this in the Liebig operation anomalies but I got the forbidden sign. So I then posted it in this section and I noticed today it's not there.
Take two.
What I did for my liebig and then to my shotgun after I noticed a difference. For the liebig I took the inner pipe diameter pipe size and cut those into two inch sections I then sliced them into three equal parts. I soldered them with about a 1/2" contact randomly around the inner pipe full length. As I started sliding the inner pipe I would pull the tabs out to there just touching the outer pipe. This gave me much more surface area and disrupted the water flow in the liebig. And when I made my shotgun I did the same idea on that. That a little more weight and more time consuming assembling but I believe it was worth it.