SS Brewtech PRV - Pressure Relief Valve for Boiler?

[Johnnywhiskey]

I'm looking for some PRV options for a steam setup I'm planning. I came across a 2" tri clamp cap with a port to add a SS Brewtech PRV that they use on their fermenters. The PRV is set to release at 2-2.5psi and mounts in a 7/32" hole. Thoughts on whether this would be a adequate PRV for a steam setup? My steam generator would be a 15g keg shell with a 5500w element.

Thx!

https://www.ssbrewtech.com/products/pre ... d165&_ss=r