I got bored

Vapor, Liquid or Cooling Management. Flutes, plates, etc.

Moderator: Site Moderator

Post Reply
User avatar
Corn Cracker
Posts: 1133
Joined: Sun Jun 13, 2021 7:25 am
Location: s.e. Texas

I got bored

Post by Corn Cracker »

While doing a spirit run this morning I gave in and built a reflux column, its 2 inch and only about 40 inches tall right now, I'm out of 2 inch ferruls, i need about 3 or 4 more, ive got more 2 inch for more hight. I think I'm going with lava rock for packing, to get started at least. Yall have got me
20250921_093935.jpg
20250921_093935.jpg
wanting to try my hand at gin
20250921_104716.jpg
You do not have the required permissions to view the files attached to this post.
I think I'll go home and fire up my still, it might not make me feel better but, I bet it will
MooseMan
Master of Distillation
Posts: 3235
Joined: Fri May 28, 2021 4:54 am
Location: Wales UK

Re: I got bored

Post by MooseMan »

Hahaha, this hobby has bitten you hard now Cracker!
I can identify! :lol:

OEG is a great start point for a gin journey. :wink:
Make Booze, not War!
User avatar
Corn Cracker
Posts: 1133
Joined: Sun Jun 13, 2021 7:25 am
Location: s.e. Texas

Re: I got bored

Post by Corn Cracker »

Man, I think the bite got infected at some point 😆
I've had all the parts for a while now, the coiled condenser i made about 3 years ago, just to see if I could.
I still have the 3 inch pipe to mess with when I get the ferlux thing figured out, I'll upgrade it
I think I'll go home and fire up my still, it might not make me feel better but, I bet it will
User avatar
Corn Cracker
Posts: 1133
Joined: Sun Jun 13, 2021 7:25 am
Location: s.e. Texas

Re: I got bored

Post by Corn Cracker »

IMG_4525.jpeg
She's up and running, i put 6 rolls of 4inch(streched out to 5 inches) x 16 foot long copper mesh rolls in a 42 inch column and produced 190pr (187 corrected) neutral, i think i need to slow the run down or add more mesh, i had a steady, thin stream the whole run. This run was 3 gallons of "high wines" it consisted of a tight cut sugar wash strip and some previous runs I didnt care for thinking it would strip the flavors, not quite there is a hint of the pecan maceration and oak, it has that buttery sweet smell of the UJ that I didnt mean to add to the carboy but, it really came through. This will be reran with another sugar wash stripping run to strip that out more and a slower spirit run
You do not have the required permissions to view the files attached to this post.
I think I'll go home and fire up my still, it might not make me feel better but, I bet it will
User avatar
BigSwede
Trainee
Posts: 828
Joined: Thu Feb 06, 2014 10:36 am

Re: I got bored

Post by BigSwede »

Nice one CC! I've never seen a configuration like that, a great use of space, and it keeps the balance on the column within reason, rather than a long leibig trying tp pull a column over.

Some times, flavors come through, and it's not always a bad thing, depends on what you want. :thumbup:
User avatar
Corn Cracker
Posts: 1133
Joined: Sun Jun 13, 2021 7:25 am
Location: s.e. Texas

Re: I got bored

Post by Corn Cracker »

BigSwede wrote: Wed Jun 24, 2026 9:46 am Nice one CC! I've never seen a configuration like that, a great use of space, and it keeps the balance on the column within reason, rather than a long leibig trying tp pull a column over.

Some times, flavors come through, and it's not always a bad thing, depends on what you want. :thumbup:
Thanks Big, i was all over the road on its test drive but, this run was a lot smoother
I think I'll go home and fire up my still, it might not make me feel better but, I bet it will
Post Reply