I like sipping proofed down neutral and I like to keep a supply of “industrial ethanol” in a gas can so anything I try and fail at will get used eventually but it’s been a rough road to actually make a whiskey I have been happy with.
I’ve turned expensive brew shop malts into neutral after not being able to get a simple pot still run out of them without seeming to pull the same nasty (tailsy?) flavor all the way through the run no matter how slow or fast I run.
I’m asking myself: Are there even any hearts in here?
But a run through the column cleans it up….mostly I guess.
Ran a HBB failure through the column last year
Made nice neutral though.
This year I finally just stuck to 100% feed corn, because it’s cheap and I have the large batch method down pretty good, and have managed to get a few BadMo clones full with what I would consider decent product.
I guess the fact that I don’t really know what anything is “supposed” to taste like doesn’t help and that I’ve only started sipping liquor a couple years ago to try and develop a palette.
It’s only in the last few runs when rubbing some pot stilled tails between my hands and letting them air out that I actually detected the infamous wet dog smell. To me tails has always been what starts coming out the column at the end of a reflux run and I never got wet dog from that. Just a weird different kind of alcohol smell and taste.
I did change a few things in my 50ish gallon fermentation process and wonder if that made the difference.
I used to add a pinch of acetic acid crystals to the water because I was worried about chlorine.
I’d use enzymes at the right PH and temperature and dump ice in to cool to proper temperatures while mashing.
I would boil up 1/2 cup of bakers yeast and add .75 grams per gallon of DAP, a healthy pinch of Epsom salt and a few B vitamins.
Then I’d put oyster shells in a bag hanging up from the bottom.
I’d pitch about 1/2 cup of bakers yeast at around 95 degrees.
Sometimes my temperature would get up over 100 degrees…..it’s hot here in summer.
Now, on 100% corn milled to coarse cornmeal, I skip the acetic acid, the dead yeast and the B vitamins.
I add a small amount of DAP and a small pinch of Epsom salt (probably don’t need because our water is hard).
I don’t add ice (I do use about 1.5 gallons of frozen backset) and use a copper wart cooler to bring the temperature down. That’s after using water to top up that has sat in the barrel I use for my condenser for a day or 2 to air out as much chlorine as possible.
I use a large slab of natural marble for PH control….it never gets below 4.
I get it down to about 85 degrees before pitching. I’ve been using Angel Red Label.
My ferment temp hasn’t climbed above 97 on my last several batches.
On top of all that, despite my reading this site for years, I just came upon the information that a pot still run should take about 6 hours…..any pot still run.
Huh, didn’t know that but I’ve been targeting my takeoff for that goal.
3 strips to about 30% and a spirit run with a gallon or so of the wash added.
This seems to be working and when it cools down around here again I’ll try adding some more expensive grains again.