Lids and Corks from Liquor Bottles

This hobby is fun & enjoyable, but it is not tiddlywinks. Be safe!

Moderator: Site Moderator

Post Reply
Silence
Novice
Posts: 23
Joined: Thu Oct 01, 2026 8:34 am
Location: Canada

Lids and Corks from Liquor Bottles

Post by Silence »

So far I have just been storing spirits in gallon jars with natural cork but I need to move some into smaller containers. I was thinking of reusing liquor and wine bottles but don’t want to assume the lids on them are safe just because they are used commercially. Cheap liquor here is sold in plastic bottles which I will not buy or put my own stuff in...

Most of the liquor and wine bottles I have use screw top lids that have a plastic liner/seal. It seems this liner is made from PVDC - Polyvinylidene chloride and I have not been able to find much information on its suitability with high abv spirits and if it will leach any chemicals into the product. I also have some that have hard plastic lids and some with synthetic T corks.

Does anyone know if these are safe to use or have any better suggestions if not?
User avatar
Yummyrum
Admin
Posts: 10579
Joined: Sat Jul 06, 2013 2:23 am
Location: Fraser Coast QLD Aussie

Re: Lids and Corks from Liquor Bottles

Post by Yummyrum »

Definitely don't use synthetic cork .

Our top choice would be to get some Teflon sheet and cut seals to fit .

Me personally have just reused commercial glass spirits bottles for over 15 years as do most Home distillers that I know . :wink:
User avatar
Corn Cracker
Posts: 1397
Joined: Sun Jun 13, 2021 7:25 am
Location: s.e. Texas

Re: Lids and Corks from Liquor Bottles

Post by Corn Cracker »

I've found natural bottle corks on Amazon that I started using and they also have screw on lids available that are supposedly safe for alcohol that I've been considering. Maybe check those out
I think I'll go home and fire up my still, it might not make me feel better but, I bet it will
User avatar
Corn Cracker
Posts: 1397
Joined: Sun Jun 13, 2021 7:25 am
Location: s.e. Texas

Re: Lids and Corks from Liquor Bottles

Post by Corn Cracker »

https://www.burchbottle.com/38-400-Blac ... PyxoMFgopY

From what I understand these are alcohol/chemical resistant and safe for our needs.
I'm sure I'll be corrected if I'm wrong but all my reading has pointed me to this particular style and make.
I think I'll go home and fire up my still, it might not make me feel better but, I bet it will
MooseMan
Master of Distillation
Posts: 3311
Joined: Fri May 28, 2021 4:54 am
Location: Wales UK

Re: Lids and Corks from Liquor Bottles

Post by MooseMan »

Just start collecting interesting commercial spirit bottles and keep any natural corks that you can find.

Corks are very easy to shape with abrasive paper to fit a chosen bottle.

Good quality fizzy plonk also has large corks, so grab those when you can.

Make friends with your local bars etc.
Make Booze, not War!
User avatar
Copperhead road
Distiller
Posts: 2114
Joined: Thu Jan 12, 2017 4:28 pm
Location: Brisvegas downunder OZ

Re: Lids and Corks from Liquor Bottles

Post by Copperhead road »

MooseMan wrote: ↑Wed Nov 18, 2026 12:48 am

Make friends with your local bars etc.
Thats how i stay stocked with bottles for gifts.
Never mistake kindness for weakness....
MooseMan
Master of Distillation
Posts: 3311
Joined: Fri May 28, 2021 4:54 am
Location: Wales UK

Re: Lids and Corks from Liquor Bottles

Post by MooseMan »

Yeah, a shaped cork to fit and a nice shrink sleeve over it makes a decent presentation.
Make Booze, not War!
Silence
Novice
Posts: 23
Joined: Thu Oct 01, 2026 8:34 am
Location: Canada

Re: Lids and Corks from Liquor Bottles

Post by Silence »

Cutting ptfe sheets is a good idea and would be cheaper than buying corks. Most wine here is screw tops and the few that are cork are all amalgamated or synthetic so I don't have a supply of free cork or I would definitely just do that. I was able to find a source for natural t corks but I would rather avoid the expense if possible.

I'm going to try soaking the seal from a screw top lid in high proof neutral to see if there is any noticeable degradation.
30xs
Rumrunner
Posts: 686
Joined: Thu Jan 03, 2019 6:05 pm
Location: WV

Re: Lids and Corks from Liquor Bottles

Post by 30xs »

https://www.usplastic.com/catalog/item. ... emid=33144
If transferring to mason jars this company makes liners that were used by some. I don’t remember the exact sizes needed for large, or small, mouth jars. Others may chime in for that.
User avatar
BigSwede
Distiller
Posts: 1006
Joined: Thu Feb 06, 2014 10:36 am

Re: Lids and Corks from Liquor Bottles

Post by BigSwede »

Silence wrote: ↑Wed Nov 18, 2026 10:58 am I'm going to try soaking the seal from a screw top lid in high proof neutral to see if there is any noticeable degradation.
My chemist senses are on alert here - you can have little to no visible degradation in a polymer, yet the solvent can possibly be sucking all sorts of plasticizers and organic compounds from it. Be careful.
User avatar
Corn Cracker
Posts: 1397
Joined: Sun Jun 13, 2021 7:25 am
Location: s.e. Texas

Re: Lids and Corks from Liquor Bottles

Post by Corn Cracker »

BigSwede wrote: ↑Wed Nov 18, 2026 12:06 pm
Silence wrote: ↑Wed Nov 18, 2026 10:58 am I'm going to try soaking the seal from a screw top lid in high proof neutral to see if there is any noticeable degradation.
My chemist senses are on alert here - you can have little to no visible degradation in a polymer, yet the solvent can possibly be sucking all sorts of plasticizers and organic compounds from it. Be careful.
Real talk right there. Don't trust it
I think I'll go home and fire up my still, it might not make me feel better but, I bet it will
User avatar
Copperhead road
Distiller
Posts: 2114
Joined: Thu Jan 12, 2017 4:28 pm
Location: Brisvegas downunder OZ

Re: Lids and Corks from Liquor Bottles

Post by Copperhead road »

I picked up 1600 corks from a thrift shop. cost me $4 for the lot. I have been using them for 10 years and still have well over 1000 corks.

i use 'Widgetco for all new corks and widemouth corks for mason jars.
You do not have the required permissions to view the files attached to this post.
Never mistake kindness for weakness....
MooseMan
Master of Distillation
Posts: 3311
Joined: Fri May 28, 2021 4:54 am
Location: Wales UK

Re: Lids and Corks from Liquor Bottles

Post by MooseMan »

Wow Copper!
I'm constantly on the lookout for stuff like that but never get that lucky...
Make Booze, not War!
Post Reply