Re: phase angle controller build
Posted: Wed Mar 26, 2014 6:19 pm
Thanks will try the above. May have to go back to propane. Just wanted to be fancy and be able to use it inside in the winter.
Home Distiller
The Largest Online Resource for Distillers
https://homedistiller.org/forum/
phase angle controller build
Page 2 of 2
Re: phase angle controller build
Posted: Thu Mar 27, 2014 4:09 pm
Is there any way you can post some pics of inside the box. Did you take the power supply out of the case and put the guts of it in your new box. I work better with pics and i can't see from your pics posted.
Re: phase angle controller build
Posted: Fri Mar 28, 2014 5:15 am
sorry about the pics, don't know why I hosted off site.
here's the inside of my box
My fan is run from a 12v wall wort that gets plugged in separately. Just to clean it up some I added a 12v socket to my box for the fan plug in.
here's the inside of my box
- P3260003.JPG (26.57 KiB) Viewed 825 times