Page 1 of 1
Clearing a wash
Posted: Wed Feb 15, 2006 3:34 pm
by Guest
using a reflux what purpous, if any is there in clearing a wash totally??
Posted: Wed Feb 15, 2006 3:36 pm
by pipe_cleanner
For one the reflux will have a eisier job of stripping all the other stuff from the alcohol. Making it more efficent at its job.
Posted: Wed Feb 15, 2006 3:38 pm
by knuklehead
It's not really necessary, some do some don't. You'll have to try it and decide for yourself.
Posted: Thu Feb 16, 2006 1:17 pm
by crackher
i would have to say that clearing a wash will provide you with a more stable boil. Think of boiling piece wihch are placed inside your pot. if you have a ton of slugde kicking arounf the bottom it will not boil as effectivly. Also I would assume that the column (when doing large runs) may begin to lose effective plates since the packing will begin to get dirty. but i am not a chemist, I am only thinking out loud here..but I do know that the cleaner the wash the easier the clean up afterwards...
Posted: Thu Feb 16, 2006 1:40 pm
by possum
Clearing the wash could be desireable if you have an internal heating element to prevent scorching.