Page 1 of 1
New Member In Search of INFO!
Posted: Wed Feb 16, 2011 12:06 am
by PBRman
howdy, i never done this before but have always wanted too. Trying to get together some supplies to make a still. Im trying to keep costs to little if none possible. I have a lot of shit on my farm so planning on not spending much. Im looking to make plane old shine nothing fancy as long as its high proof. And also dont wanna have a huge still i only wanna make a bottle at a time or a jar full per run. If anyone could help PLEASE DO. send me some pictures or any info.
THANKS A LOT
Re: New Member In Search of INFO!
Posted: Wed Feb 16, 2011 2:05 am
by Mud Mechanik
Welcome aboard, all the information you need to answer your questions is here on the forums, happy reading and good luck on the build. I've never heard of someone having all the right stuff for a proper build just laying around so be prepared to spend a little.
Re: New Member In Search of INFO!
Posted: Wed Feb 16, 2011 2:28 am
by olddog
The New Distillers reading lounge is a good place to start.
OD
Re: New Member In Search of INFO!
Posted: Wed Feb 16, 2011 2:31 am
by Samohon
Welcome to HD PBRman...
Trying to cut anything smaller than 10L can be a PITA, but it can be done... Better to go with a minimum of 30L (that would give you a 20L charge)... It will be a lot easier to control the cuts...
Here are some links to what I call Essential Reading...
Have fun and stay
SAFE my friend...
EDIT: Just beat me to it OD....
Re: New Member In Search of INFO!
Posted: Thu Feb 24, 2011 5:22 am
by The Baker
If you have a derelict gas hot water system you can salvage the burner.
Make sure you use the correct orifice, for propane or natural gas.
Re: New Member In Search of INFO!
Posted: Thu Feb 24, 2011 6:12 am
by Bushman
Welcome to the forum the essential reading is important take care and be safe!