Page 1 of 1
Hello from Minnesota
Posted: Sun Dec 04, 2011 9:29 pm
by mtdew_mn
I'm been making beer and wine for the last few years, and decided to take the next step
I'm putting together a 2" bokabob, with a pony keg for a boiler.
My interests are mainly neutrals, though I may try some rum when I get the hang of things. I'm going to try a batch of the Birdwatcher's sugar wash for my first batch.
Re: Hello from Minnesota
Posted: Mon Dec 05, 2011 6:50 am
by rad14701
Welcome aboard, mtdew_mn...
It sounds like you have been doing your research because using a Bokakob dual slant plate reflux column to run Birdwatchers wash is a good way to produce clean neutral spirits...
Will you be heating the pony keg with gas or electric...???
Good luck...
![Thumbup :thumbup:](./images/smilies/icon_thumbup.gif)
Re: Hello from Minnesota
Posted: Mon Dec 05, 2011 7:58 am
by Prairiepiss
Welcome aboard.
Sounds like your off to a good well thought out journey.
Good luck be safe take your time.
Re: Hello from Minnesota
Posted: Mon Dec 05, 2011 8:10 am
by Odin
Beer & whine ... I see some good whiskey & brandy in the future ...
Welcome aboard, Minnesota!
Odin.
Re: Hello from Minnesota
Posted: Mon Dec 05, 2011 9:11 am
by Bushman
Welcome to the forum, you do have a leg up with your background seems like a natural progression as many others have moved from beer and wine to liquor!
Re: Hello from Minnesota
Posted: Mon Dec 05, 2011 6:39 pm
by mtdew_mn
rad14701 wrote:Welcome aboard, mtdew_mn...
It sounds like you have been doing your research because using a Bokakob dual slant plate reflux column to run Birdwatchers wash is a good way to produce clean neutral spirits...
Will you be heating the pony keg with gas or electric...???
Good luck...
![Thumbup :thumbup:](./images/smilies/icon_thumbup.gif)
For now, propane (assuming there's a warm enough day that I wouldn't mind spending a day outside). I've already got a burner for my beer, so I'll start with that. I do like the idea of not having an open flame so close to a flammable liquid, so I may eventually go with electric. Elements are cheap, but when you start adding controller circuits and GCFI breakers and extra circuits, the costs start to add up.