Made entirely from 2" copper, the column is 1500mm (59" roughly)
The tee at the bottom of the condenser will have the reflux tube going back into the column with a single valve to set the draw off rate (and thus reflux rate too).
First Time Still Design - Constructive Criticism Encouraged
Moderator: Site Moderator
-
Kiint
- Novice
- Posts: 31
- Joined: Sat Jul 01, 2006 11:57 pm
First Time Still Design - Constructive Criticism Encouraged
Made entirely from 2" copper, the column is 1500mm (59" roughly)
The tee at the bottom of the condenser will have the reflux tube going back into the column with a single valve to set the draw off rate (and thus reflux rate too).