Home Distiller

It's getting close to being done, just the soldering needs to get finished.

Looking good King.

sweeeeeeeeet

Cutting site holes w 1/4 end mill.

Looks like that's going to be fun.

where did you get them site glass fittings? looking good

SHINER26 wrote:where did you get them site glass fittings? looking good

I made them, one of the perks of my job. But I saw something at McMaster Carr Type 2205 Stainless Steel http://www.mcmaster.com/#bull's-eye-sights/=gnubch" onclick="window.open(this.href);return false;" rel="nofollow kinda expensive. I bought the glass from them & 4in tri clamp.

Did I ever mention that I hate you basterds that work at machine shops?

Beeeeeeeeeeuuuuuutiiiiful

MuleKicker wrote:Did I ever mention that I hate you basterds that work at machine shops?

Beeeeeeeeeeuuuuuutiiiiful

Seriously!! Looking good koh!

MuleKicker wrote:Did I ever mention that I hate you basterds that work at machine shops?

Beeeeeeeeeeuuuuuutiiiiful

Sorry I was too lazy to go to college. Didnt see the point when I already was making good money.

Looks sweet king!

Thanks, the only thing I'm not sure about is the height of the downcomer on top of the plate. I have 3/4 right now.

Keep it coming that thing is purdy.

Some pics of the deplagmator, punching plate holes, by hand mind you, no machine involved.

looking good man. looks like your build is right along the time line as mine. just started the sight glasses on the Lathe today. its gonna be a bit until i get mine done because im going the same route and machining from raw bar stock like yourself.

love the look your getting with the stainless adn copper mix.

just-a-sip wrote:looking good man. looks like your build is right along the time line as mine. just started the sight glasses on the Lathe today. its gonna be a bit until i get mine done because im going the same route and machining from raw bar stock like yourself.

love the look your getting with the stainless adn copper mix.

Thanks, yeah the look is cool but a pain in arse.

badass hearts! looks like its gonna be pretty amazing

It's getting hot in here. I better hurry up.

Killer! Me Likey!

knucklhed wrote:Killer! Me Likey!

Thanks knuck, I just need to make gaskets & polish her up. Im hoping to get her first run in a few weeks. Its only taking me since christmas.

What material are you using as the center post for your plate tree? The work looks great. That Cu/SS dephlag is wicked cool!

Padraig wrote:What material are you using as the center post for your plate tree? The work looks great. That Cu/SS dephlag is wicked cool!

Stainless steel, I think 1/4 inch 20 threads per inch. Any good hardware store, not expensive.

My alien probe. Found two minor leaks after deplag, after fixing them I have to attach water fittings.

"This is ground control to Major Tom!"

Looking good, King Of Hearts...