Grain Mill
Posted: Tue Jan 14, 2014 9:55 am
Here is a picture of my new Grain Mill. It's a monster mill II, I made a temporary set-up to see how it would work. I got the mill as a Christmas gift and had the motor and pulleys I took from an old compressor. I had to add some sleeves to the pulley to fit the mill so I am into the whole project at about $7.00.
My plan is to go to the Re-Store and buy a used cabinet now that I know it works and build it in. Tested it on some corn and found my belt was too loose so made an adjustment and it worked great. I also adjusted the rollers from the factory setting of .045 to .037 as I believe that is what I've read as the proper gap.