PID Controller
Moderator: Site Moderator
-
jdpete
- Novice
- Posts: 83
- Joined: Sun Feb 11, 2007 5:58 pm
PID Controller
Is anyone using a PID controller? And if so are you using ssr on both heating elements or only on the larger element. Which scenario would be better? I plan on wiring a 4500 watt element and a 1125 watt element. currently the schematic I have drawn out has the 1125 always on. The boiler will always have at least 8-10 gallons of starting liquid. Just looking for some suggestions before I hardwire.