Page 1 of 1
Air cooled condenser
Posted: Sun Nov 04, 2007 12:56 am
by shadylane
I have a "base board heater" that is made out of 1/2 inch copper pipe with aluminium fins on the outside, its about 6 feet long. I haven't cut it open yet to see whats in it. I was wondering if anyone has used one of these yet for a condenser? It would be nice to use my still as a heater for the radio shack this winter. I've been using a liebic and I'm tired of having the garden hose freeze up because I forgot to drain the water out of it. Any thoughts or ideas would be appreciated
Posted: Sun Nov 04, 2007 1:10 am
by CoopsOz
Man, it must get cold where your at! I complain of the cold here in Melbourne, but clearly I shouldn't. BTW, if that made no sense......blame the UJSM.
Posted: Sun Nov 04, 2007 1:29 am
by shadylane
[quote="CoopsOz"]Man, it must get cold where your at! I complain of the cold here in Melbourne, but clearly I shouldn't. BTW, if that made no sense......blame the UJSM.[/quote]
UJSM can be blamed for many a thang.
Posted: Sun Nov 04, 2007 9:18 am
by wineo
I see a picture of one that somebody made so it can be done but will need to be cleaned out really good.I dont think it will work as good as a leibig.