If someone could take a look at my electric diagram and give me some feedback, I would greatly appreciate it. I have done a lot of research and want to play it safe.
A few questions I still have are:
-The wire I plan on using has black/white/green wires. The other wiring diagrams I have seen don’t have a white wire, but a red one. As long as I am not building anything that will have to pass a building inspection, and will ONLY be used for this one project, is it safe to use the white (neutral) wire as a hot wire?
-The outlet I have in my apartment is a 20A 240V outlet. I learned that I could not hook up a 5500W element to that so should this 4500W one be good?
-Should I put a fuse on here somewhere? If so, what fuse and where?
-A fan? From what I gathered, if you have a good enough SSR, a fan is unnecessary. Better safe then sorry? If I should get a fan, what one and how should I attach it?
Everything I plan on getting:
The cable-
http://www.amazon.com/gp/product/B002G9 ... PDKIKX0DER
The meter-
http://www.amazon.com/gp/product/B00DV ... "nofollow
The heater element
http://www.amazon.com/gp/product/B0002Y ... PDKIKX0DER
The SSR
http://www.amazon.com/gp/product/B00899 ... AZDOWP300U
The Pot
http://www.amazon.com/gp/product/B008DF ... AZDOWP300U
Please take a look at my electrical diagram.
Moderator: Site Moderator
-
Stiller1134
Please take a look at my electrical diagram.
You do not have the required permissions to view the files attached to this post.