Parts for a controller

Zack200513 · Post by **Zack200513** » Sat Nov 28, 2015 5:47 pm

Been reading low of posts about electric controllers. I understand the wiring and boxes. Just not clear on the parts needed for controlling the amps and relays. Want to build one just in need of advice on what to get.

Post by **raketemensch** » Sat Nov 28, 2015 6:33 pm

Search for Jimbo's electric conversion. It's got a ton of links to the bits you'd need, with plenty of descriptions about why you would need them.

Zack200513 · Post by **Zack200513** » Sat Nov 28, 2015 6:44 pm

Than you I think I read that is a good one to read.

Post by **S-Cackalacky** » Sun Nov 29, 2015 5:57 am

Cranky has a good write up with simple to follow instructions and links to sources for the parts - http://homedistiller.org/forum/viewtopi ... 85&t=50385 .

flyweed · Post by **flyweed** » Sun Nov 29, 2015 6:17 pm

I Just went through all of this..just look at some of my threads on this topic....I had a couple guys post links to ALL the parts you'll need over on Ebay and Amazon. I just got done building mine

Home Distiller

Parts for a controller

Parts for a controller

Re: Parts for a controller

Re: Parts for a controller

Re: Parts for a controller

Re: Parts for a controller