Hey guys. Taken a couple of weeks off to do some work on the house etc. I just took delivery of a 3/8 needle valve to replace the 1/2" gate valve I've using for boka takeoff (from Amazon USA). It seems mighty small, but everything I've read suggests it will be an acceptable size. Am I right?
If so, I need to figure out what kind of coupler I need to fit to my existing setup. I can't find anything that offers the appropriate step down in size AND will work with the male threads. Might need to add additional piping and use compression fittings. Any thoughts?
Needle valve upgrade - baffled
Moderator: Site Moderator
-
Patching246
- Swill Maker
- Posts: 189
- Joined: Fri Feb 20, 2015 1:51 pm
Needle valve upgrade - baffled
You do not have the required permissions to view the files attached to this post.
John 2:1-11. Jesus saith unto them, 'Fill the waterpots with water, some sugar & tomato paste'. And they filled them up to the brim and Jesus transformed them into low wines and this manifested forth his glory; and his disciples believed on him.