Home Distiller

Just thought I'd share the new shiny insulation on my boka. It's cut my heat time down to 30-40 minutes for a 6 gallon wash and ran me about $25, all in. Basically it's a two layers of refectix around the keg, fastened together with velcro where the insulation overlaps, and a single layer of reflectix on the column, again held in place with velcro.

I'm pretty pleased with it. I ran a spirit run yesterday and drew off 15 pints of 180 proof at about 43 minutes per pint. Still got plenty to do in this spirit run but I got tired last night and shut down around 1am.