Home Distiller

The search function returns a lot of what to NOT use. Mixed responses on whether Norprene and Tygon are safe (mixed = no to my mind), so is PTFE tubing the only safe tubing for product? Is it flexible and where do folks source it?

I noticed Glacier Tanks sells some 'distillery hose' that's made of UHMWPE / EPDM.
https://www.glaciertanks.com/distillery ... 1.0-5.html" onclick="window.open(this.href);return false;" rel="nofollow
I think the inside of the hoses are made with UHMWPE while the outside is EPDM for durability.

I've been thinking about picking up some UHMWPE tubing to experiment with a bit. Placed like Mcmaster-Carr have it for decent prices...

I should clarify: looking for more like home distilling sizes

Benredbeard wrote:I should clarify: looking for more like home distilling sizes

Haha, yeah that's why I brought up McMaster-Carr... Obviously not getting that tubing from Glacier lol.

Sometimes there isn't much choice.

I get it on Ebay. It is flexible.

The PTFE hose I have is not flexible.
If you bend it you get a kink.
Not sure what this other hose you are talking about is, I'd better do some searching.

so far the only material being discussed on this thread that complies with rule #8 ( reread it) is ptfe.

soft copper tubing also works and complies with rule #8 and is some what flexible.

I mean if you want to get technical PTFE is a thermoplastic polymer. I get the rule and why it exists. I was merely pointing out that commercial distilleries may be using UHMWPE for their tubing. I'm not advocating for any one material. Just discussing materials that seem to be used.

ydoih8u wrote:I mean if you want to get technical PTFE is a thermoplastic polymer. I get the rule and why it exists. I was merely pointing out that commercial distilleries may be using UHMWPE for their tubing. I'm not advocating for any one material. Just discussing materials that seem to be used.

As cob pointed out this is not a product as yet deemed safe as far as our forum rules go so is not a produce that can be recommended. I don't no a whole lot about about this product but did read up on a whole bunch of data and resistance charts. Perhaps it is something that can be discussed in a stand alone specific thread on this product backed with sound evidence on its safety and resistance at higher temperatures but to discuss or recommend it here at this point in time is in fact a breach of the forum rules as they currently stand

Sure. OP, hopefully others can help ya out on where to source some good copper tubing.