Home Distiller

Just wondering if any you have used the 220V Variable Single Element Temperature Controller from mile high distilling . This is what I was leaning towards for a 15 gallon keg still. Tried uploaded attachment but failed to.





diesel1975 wrote:Just wondering if any you have used the 220V Variable Single Element Temperature Controller from mile high distilling . This is what I was leaning towards for a 15 gallon keg still. Tried uploaded attachment but failed to.





Grossly over priced but will probably work fine.

diesel1975 wrote:Just wondering if any you have used the 220V Variable Single Element Temperature Controller from mile high distilling . This is what I was leaning towards for a 15 gallon keg still. Tried uploaded attachment but failed to.

Was this the one
https://milehidistilling.com/product/22 ... ontroller/" onclick="window.open(this.href);return false;" rel="nofollow

Well you could build a similar unit for a lot less than the $450 they are asking for it. Other than that it seems well made and will do the job.

Be safe
OVZ

450 for that.. woah!! No way, you can make the same controller for a fraction of the cost.

We have much befter controllers posted and built with complete links to items in the electric section.

https://www.ebay.ca/itm/Electric-Regula ... 2422049149" onclick="window.open(this.href);return false;" rel="nofollow


Tons of controllers on eBay that get good reviews here. Digital or dial

Throw on a wattage displayer too, definitely

https://www.ebay.ca/itm/AC-80-260V-220V ... 2560815080" onclick="window.open(this.href);return false;" rel="nofollow

A few weeks and $30 will get you all you need.

Throw a fan in there too to keep everything cool

Or go with anything from Auberins. Solid company

http://www.auberins.com/index.php?main_ ... cts_id=332" onclick="window.open(this.href);return false;" rel="nofollow