My welcome back

Other discussions for folks new to the wonderful craft of home distilling.

Moderator: Site Moderator

Post Reply
hidalgo
Novice
Posts: 98
Joined: Thu May 31, 2012 8:16 am

My welcome back

Post by hidalgo »

I haven't made a run in something like 4 years, so I am trying to break the rust off. I got out the fermenter and buckets and gave them a good scrub with dish soap and water. I rinsed them super well, they are air drying as I type.

My plan is to break out the pot still and start with a steam run and then turn on the cooling to make sure it is good. Then I will run a Birdwatcher's. Given that the still has been in storage so long, will the spirit be safe to consume after I steam clean the still? Any other thoughts?

Thanks all, feels good to be back in the saddle. I wasn't sure where to post, this seemed the most likely spot
DSM Loki
Swill Maker
Posts: 477
Joined: Tue Feb 24, 2015 12:09 am

Re: My welcome back

Post by DSM Loki »

I'd give it a steam out with water and vinegar, and do a small sacrificial run to be sure. Better safe than sorry ya know
User avatar
Expat
Distiller
Posts: 2251
Joined: Fri Feb 24, 2012 3:58 pm

Re: My welcome back

Post by Expat »

Welcome back.

I would think a steam is plenty sufficient for a clean so long as it was stored clean.
_____________________
EXPAT

Current boiler and pot head
Cross flow condenser
Modular 3" Boka - pics tbd
___________________
hidalgo
Novice
Posts: 98
Joined: Thu May 31, 2012 8:16 am

Re: My welcome back

Post by hidalgo »

Indeed it was stored clean, right next to my .243 and .44. I might keep a heart cut.
Post Reply