Hello there.
Moderator: Site Moderator
Hello there.
I am very new to the hobby, my first run was just last summer. Just been using a little 1 gal air still to make rum n'such. Looking for some advice on how to take this to the next step.
Re: Hello there.
Welcome, if you want to take it up a step we suggest nothing less than 5 gallons to make easier cuts.
Re: Hello there.
Welcome aboard man. Check out the Tried and True. A lot of great recipes there. Have fun and stay safe
Re: Hello there.
hello and welcome!!
-
Hoosier Shine9
- Swill Maker
- Posts: 412
- Joined: Sat Aug 27, 2016 10:00 am
- Location: central indiana
Re: Hello there.
Welcome Sam,
Think about a 15.5 gallon SS Keg as your boiler.
put a 4 inch tri-clamp flange on it. you can get your hand/arm inside to clean.
Then you can make a Reflux column, or a potstill head for it.
You can get a reducer with tri-clamp flanges that go from 4" down to 3", or 4" down to 2".
That gives you LOTS of options..... 4" or 3" Flute, 2" 3" or 4" potstill head.
Just make it all modular then there are even more potential options
Think about a 15.5 gallon SS Keg as your boiler.
put a 4 inch tri-clamp flange on it. you can get your hand/arm inside to clean.
Then you can make a Reflux column, or a potstill head for it.
You can get a reducer with tri-clamp flanges that go from 4" down to 3", or 4" down to 2".
That gives you LOTS of options..... 4" or 3" Flute, 2" 3" or 4" potstill head.
Just make it all modular then there are even more potential options
-
Bradster68
- Site Donor
- Posts: 2242
- Joined: Mon Dec 06, 2021 9:57 am
- Location: Canada
Re: Hello there.
Welcome and 
I drink so much now,on the back of my license it's a list of organs I need.