Inspire me?
Posted: Wed Oct 23, 2024 11:34 am
I went digging for something totally unrelated to distilling this evening, looking for raw materials to make a fancy dress costume for my son. (He's going to a party dressed at "Aquaman" since he looks so buff he can carry it off)
While looking for a bit of brass for a belt buckle, I found a bag of tubes...
These are leftovers and bits I collected when doing my initial CCVM build and then forgot about.
There's 3" stainless with a welded flange and 3" copper, both at approx. 400mm long, plus 2x copper 2.5" at approx. 500mm long, one with a flange rolled out.
I don't really NEED to add anything to my distilling kit at the moment, but well, they are just sat there, waiting.
All ideas welcome!
While looking for a bit of brass for a belt buckle, I found a bag of tubes...
These are leftovers and bits I collected when doing my initial CCVM build and then forgot about.
There's 3" stainless with a welded flange and 3" copper, both at approx. 400mm long, plus 2x copper 2.5" at approx. 500mm long, one with a flange rolled out.
I don't really NEED to add anything to my distilling kit at the moment, but well, they are just sat there, waiting.
All ideas welcome!