Yeast starter: Difference between revisions

Latest revision as of 17:20, 4 October 2017

Redirect to:

Yeast

@@ Line 1: / Line 1: @@
-[[file:yeast_starter.jpg|thumb|200px|right|Yeast starter ready for [[pitching]]]]
+#redirect[[Yeast]]
-A media in which [[yeast]] is activated and encouraged to multiply to a high density so that when added to a [[wash]] it will have a better chance of populating it successfully. It is also used to decrease fermentation time. By pitching more yeast it takes less time to fully ferment the [[wash]] and reduces the chance for infection.
-==Creating a fruit based Yeast Starter==
-There are several ways to make a starter. To make a really vigorous starter for [[Inoculate|inoculating]] a [[must]] initially or restarting a stuck [[fermentation]], in a quart jar dissolve 1 teaspoon of [[sugar]] and 1/8 teaspoon of yeast nutrient in 1 cup of warm water (less than 104°F.). To this, add 1/4 cup of the [[juice]] from the [[must]] to be fermented. Sprinkle 1 packet of active dry yeast on the surface of the liquid. Do not stir. Cover the jar with a paper towel or napkin held in place with a rubber band. Wait for the yeast to become active. This could become obvious in as little as 15 minutes or could take as long as 2-4 hours. If no evidence of activation in 4 hours, the yeast was too old or dead from exposure to temperature extremes (usually heat, but possibly extreme cold). In such a case, sprinkle another packet of yeast into same jar and recover. When yeast (first or second sachet) is evidently active, add another 1/4 cup of juice from the must and recover.
-Wait until [[ebullation|vigorous activity]] returns (usually 30-90 minutes) and add another 1/4 cup of juice. When again vigorously active, add yet another 1/4 cup of juice. Wait 1-2 hours and gently pour half the liquid over the surface of the must. Do not stir. The idea is for the starter to remain on or close to the surface where there is plenty of air for the yeast to "breath." Cover the primary fermentation vessel with a sanitized cloth or sheet of plastic. After 2-4 hours, the surface of the must should have small bubbles rising from fermentation or a healthy layer of yeast culture. Stir shallowly and recover the primary. Wait another 2-4 hours and fermentation should be more vigorous. Add the remainder of the starter and stir deeply. Recover primary. If the starter does not produce a vigorous fermentation in the primary, add another 1/4 cup of juice to the reserved half of the starter media. Wait 2 hours and add yet another 1/4 cup of juice. This starter is now 2 parts juice and 1 part water. When this is fermenting vigorously, add half of it to the must as before and try again.
-== External Links ==
-*[https://www.youtube.com/watch?v=Re-fd_Nzk24 Creating a yeast starter for beer/whiskey]
 [[Category:Fermentation]]
 [[Category:Yeast]]
 [[Category:Glossary]]

Yeast starter: Difference between revisions

Latest revision as of 17:20, 4 October 2017

Navigation menu

Search