Home Distiller

Pipe_Cleanner hear

More cooling with my rods, Might not add more percent(over 93%) but will reduce the amount of cooling water I have to use. And if I have and Rod problems, I can disconect 1 to 2 rods with out upseting to much.

Hang it in a tree? as long as no leaves or bugs fly into it

Mine works, and the idea of the cooling rod is to cool the beads in the column to add another reflux in the column itself, between one rod and the rod beneeth it. It alows only the lighter alcohols to pass and the better ones, with double refluxing the heavier alcohols. You can do with out the extr...

The design is good

Add another cooling rod at the bottom or two. 1 in the middle



Might give you a extra reflux, and a extra 1-2 %

Why you want to my credit Peachey , yes Its the one off my site, Just thought you'd want some info on it.

The % I quote on the web page it a hot percentage (around 40oC) scaled down to a 20oC temp.

So a 94% a 40oC = 92% at 20oC

+ i'm not taking credit, It was soo much cheaper than the other one

Yes I would only paint outside of it,
Yes I use Copper

And thanks for the link to the post, Preping copper, is that just a soak in vinigar?

I'm using a Still Spirits reflux still modified as "Peachey" said and I stuffed a copper pot scrubber inside my reflux getting 93%, Last time one test came back at 94% I was happy, You will use less water to, running at 74oC+

Any questions email scrb@bigpond.net.au

Hey guys, I'm sick of having a shitty looking column, Could I paint it using webber bbq paint or high temp paint??

Should I clean the column 1st??

could I get any specs for that one "Uncle Jesse"?? I just can not read the tape

Actually the plastic pipe im using is "Surgical Grade" not food grade, Maybe surgical grade pipe is made to use with various chemicals, I've not had any problems.

For one the reflux will have a eisier job of stripping all the other stuff from the alcohol. Making it more efficent at its job.

fishfool
we are you in the world

Most of the others are my brewing mate and my partner in the web page, This is my only setup, it pulls up to 93% hot scalled down to 90% at 20oC. Dont misunderstand my intentions fella.

I have a Still Spirits standard reflux column with a copper scourer stuffed up the base (the column alone pulls around 70%) added to this is a reflux extention tower, full of ceramic beads) pulling 90%, Running at around 74oC using around 500mls -700mls water a minute. Is there any simple ideas to s...

ripper i've a starting point

http://www.users.bigpond.net.au/home_dr ... hecker.jpg


That picture again , the first was bad link

CHEERS

Yer, I was hoping for a better out come but It looks like I'll have to make it from copper. thems the breaks.

CHEERS

Yer I know, I have used this food grade pipe before, dont cause too much trouble if any. If it does leech out how will I tell, smell - taste??

[size=18} Hi there, I'm trying to make a constant % checker out of 13mm plastic irrigations bits picture is at http://www.users.bigpond.net.au/home_drinkers/constant_persentage_checker.jpg" onclick="window.open(this.href);return false;" rel="nofollow, and i have a question? Will ...