MY SEXY GIRL

[mash rookie]

Her she is guys. My sexy girl still needs a name. (open for sugestions) So damn shinny I am afraid to run her.

[Prairiepiss]

What the? Hello nurse!!
Huba Huba
Very nice

[kenfyoozed]

Looks great. How about naming after the month she debuted ........ June?

[LWTCS]

Whoa dude

You made one of them twisty shot gun condensing deals......Course you knew that already.

How'd that go ?

[mash rookie]

Pretty easy actually. I hard soldered five 5’, 3/8” dia soft tubes into a piece of 1”. Clamped a piece of pipe into a vise that the end would fit into, Spread them like a girl,,, Inserted a 1” od pipe in the center and started winding. When I got near the end I pulled the center tubing and finished each tube by hand and slid another piece of 1” over them. After hard soldering I cut the remainder off.

The glass was easy and cheap. Less than $20 For a 5’ piece that makes three covers.
It is cheaper than copper to do. ( I did break one during mock up) I still have one left if I screw up.

I am an artist by trade. i could not make this without treating it like a piece of art.

[Bushman]

Mash Rookie that is awesome, if I wasn't speechless I could come up with a name!

[Torp]

I am in awe, after just finishing my boka I bow to you. Knowing that your skills are so far above mine makes me feel humbled. Very nice. Let us know how she runs please.

I like Sexy Girl as a name.

[Bull Rider]

Crazy! You need to take the "rookie" out of your handle.

I admire your work, very well done. You can put me in your will right now...


Bull.

[olddog]

Great looking rig MR have you thought about where you are going to mount your control valve/s ?


OD

[Oxbo Rene]

Just absolutely Awesome ! ! ! !

[Fastill]

Dude, that is some fine ass copper smithing!!! Its too bad Penny is taken 'cause she sure is shiny as a new penny...

[blanikdog]

Beautiful work mash rookie. Bloody well done.

[frozenthunderbolt]

Call her Crystal: she gleams and is obviously something precious

[mash rookie]

OD
The martini glass shapes are the valve handles. I polished the brass valves down too far the first time and they leaked. LOL. Had to buy another set.

Cold in water is split there. Bottom valve goes down the graham. Top valve goes up to the dephlag. I spent a whole day mocking up the cooling lines to get the look that I wanted.

All the other polished brass parts was stuff that I had laying around. Just happened to have some 5/8 tubing that matched copper size so I had to use it.

Mud flap girl is from a sheet of paper thin brass that I got when I had to make a new carburetor float for my antique car. I printed the image on label paper then put two sided tape on the back before cutting her out with scissors. I dont know if it will stay when hot. I can always use tinning flux to solder her down if necessary.

I am going to put a topper on her. An eagle? Maybe a glass female?

I have more thin brass. What do guys think about thunderbolts on her back side?

I pressure tested the condensers before final assembly but still have to test the cooling lines and low pressure test the column to make sure my site glasses and lid don’t leak. I will get a couple more pictures up today!

[Mud Mechanik]

You may be a mash rookie, but your a copper expert! Very pretty work, with the mud flap girl on there and the spiraled condenser, the name " Twisted Sister" comes to mind

[Prairiepiss]

You may be a mash rookie, but your a copper expert! Very pretty work, with the mud flap girl on there and the spiraled condenser, the name " Twisted Sister" comes to mind

She's a lot better looking then Dee Snyder. A whole lot!

[mash rookie]

Thanks for the compliments guys. After reading so many flute threads I agreed with Dan that Flutes are pieces of art.
I could see that OD and KS watched every build like proud fathers waiting for the birth. I had big shoes to fill. It took me weeks to build.
I hope your proud OD. Your granddaughter is a pretty girl.
Heres a few more pictures. I will take a few close ups if you guys want to see more detail.

[Barney Fife]

!!!!!!

[azeo]

outstanding! form and function! twisted graham revealed is like the piece-de-resistance...

[Samohon]

Friggin awesome MR, love to twisted shotgun, really nice...

[AKAAB]

Brother, that is darn near pornographic, it's so sexy.

I'd call her "Money Shot".

...or "Lady Likker"...

[Kentucky shinner]

Oh Hell Ya.. damn it man you did a Great F(*(*& Job... Awesome brother.

[Stilly]

When bassist Stanley Clarke was asked about Jaco Pastorious his comment was Jaco was one of the cats! Mash you are one of the cats!!!! Very nice work.

cheers
stilly

[mash rookie]

When bassist Stanley Clarke was asked about Jaco Pastorious his comment was Jaco was one of the cats! Mash you are one of the cats!!!! Very nice work.

cheers
stilly

HUH? Ahh Thank you stilly. I dont understand the quote but I damn well appriciate the compliment.

Oh Hell Ya.. damn it man you did a Great F(*(*& Job... Awesome brother.

Thanks KS You have layed all the ground work with OD. Just adding my artist touch.
Pictures of the parrot soon.

MR

[Stilly]

When bassist Stanley Clarke was asked about Jaco Pastorious his comment was Jaco was one of the cats! Mash you are one of the cats!!!! Very nice work.

cheers
stilly

HUH? Ahh Thank you stilly. I dont understand the quote but I damn well appriciate the compliment.

Mash, sorry to confuse, I forget everyone is not a geezer into Jazz/Rock/Fusion. Stanley was/is one of the monster bass players of the jazz rock fusion genre. So was Jaco, who sadly passed away, way too young in 1987. In a biography of Jaco , Stanley was asked to comment, that is where the quote comes from.

Seeing your work, you are definately one of the cats!

stilly

[guittarmaster]

I have two things to say. first... damn that is a great looking still!!!
second, I want a condenser like that... can you give a few more details or a photo.. I think.. THINK i catch what your saying but I'm not confident enough to start one yet...

Thanks
GM

PS.

name her Trisha, then we can nick-name her Trish the Dish!

[Usge]

Wow!!
She's a beaut!

[whiskymonster]

I have more thin brass. What do guys think about thunderbolts on her back side?

i had a gf with thunderbolts on her backside. she was a great ride. go fo it fella!

j

[mash rookie]

I have more thin brass. What do guys think about thunderbolts on her back side?

i had a gf with thunderbolts on her backside. she was a great ride. go fo it fella!

j

Okay, thunderbolts it is!

Finished my parot and a few details. I think she is ready for a test run. The parot slips on to the condensor than you rotate it so the vent tube holds it in place.

[Samohon]

She sure is Sexy MR...