NEWBE

New to distillation, or simply new to the HD forums.
** Your first post MUST go here. Introduce yourself and tell us a bit about your interest in distilling. Any posts asking distilling questions will be deleted. **

Moderator: Site Moderator

Post Reply
GUNNERAR15
Novice
Posts: 15
Joined: Tue Oct 02, 2012 4:50 am

NEWBE

Post by GUNNERAR15 »

Hellow all. iam from Greenville Ohio.Just starting out.Iam interested in talking to everyone for i have a lot of questions.Iam starting out with a 15gal ss keg sitting on a propane turkey cooker with a 1''1/2x24'' copper stack 1/2 union soldered to the top/side of the stack down to a larg kettle where my worm is coiled and iced down.Looking forward to talking withya.THANKS
hwy419
Novice
Posts: 47
Joined: Thu Oct 29, 2009 1:05 pm
Location: Birmingham, AL

Re: NEWBE

Post by hwy419 »

Welcome! This sounds just like my setup only I am stainless steel 2" column. Good luck buddy!
“Quality is never an accident;
it is always the result of high intention, sincere
effort, intelligent direction and skillful execution;
it represents the wise choice of many alternatives.”
-William A. Foster
Prairiepiss
retired
Posts: 16571
Joined: Sat Dec 18, 2010 7:42 am
Location: Somewhere in the Ozarks

Re: NEWBE

Post by Prairiepiss »

Welcome aboard.

Many of your questions can be answered with a quick search around the forums.

Ice water is not the best for a worm bucket. Do a search and you will find out why.

Good luck be safe take your time.
It'snotsocoldnow.

Advice For newbies by a newbie.
CM Still Mods
My Stuffs
Fu Man

Mr. Piss
That's Princess Piss to the haters.
OlympicMtDoo
Master of Distillation
Posts: 2544
Joined: Tue Feb 01, 2011 10:48 am
Location: Olympic Mountains USA

Re: NEWBE

Post by OlympicMtDoo »

Welcome to HD gunnerar15, You have found the best place to learn, read and enjoy. OMD
Sometimes I wonder why is that Frisbee getting bigger......and then it hits me.
Post Reply