Vinyl hose

Anything cooling/condenser related.

Moderator: Site Moderator

Post Reply
Moscca
Novice
Posts: 55
Joined: Sun May 13, 2012 11:11 am
Location: Honduras

Vinyl hose

Post by Moscca »

Just ordered a Shurflo selfpriming pump for my transfer from my fermenters to my still.
Would reinforced vinyl tubing be ok for the wash transfer ?



M.
myles
retired
Posts: 2451
Joined: Wed Oct 15, 2008 11:34 am
Location: UK, in the heather

Re: Vinyl hose

Post by myles »

That all depends - mostly on the temperature involved. Some vinyl hoses just collapse when they get hot and it cuts off the flow. You do have the option of platinum cured silicon hoze. A bit pricy but good.

You will probably be OK going into the still, but could have an issue if you are using the same gear to pump it out of the boiler.
Moscca
Novice
Posts: 55
Joined: Sun May 13, 2012 11:11 am
Location: Honduras

Re: Vinyl hose

Post by Moscca »

Thanks myles, I have a drain on my boiler so don't need it to empty my boiler.
The alcohol/taste content is no issue then ?




M.
User avatar
sambedded
Trainee
Posts: 758
Joined: Tue Jul 10, 2012 11:25 pm
Location: Canada

Re: Vinyl hose

Post by sambedded »

Wash usually contains different acids . And PVC is not very resistant to them. Vinyl is rated OK for for low concentration of acids and alcohol at low temperature but... I would use polyethylene tubing. PE is much more resistant though mechanically it's not so good as PVC.
Post Reply