what should I do? suggestions please

[cotton mouth Samson]

Today at work I was told to remove what we thought was an electrical run of pipe but when I looked at it closer it was 2" copper so I removed it and now I have all this laying in my garage and need some help coming up with ideas for another build im just abot done with my 3" boka just need a keg

[CuWhistle]

Ship it to my place!!!

[Ayay]

I would keep a few 4' lengths in case I was to go for a 2" column for whatever reason, a few odd shorter lengths for a couple of pot still risers and a lye arms, three of the bends...and sell the rest at 1/2 new price or less...the cheaper it is the quicker it will go.

Or, keep it all if you have the space and the time!

[swampdog 2]

build your neighbor a still then you want have to worry about him wanting a drink of your hooch, if there like my neighbors

[salinenative]

I'm sure we could come up with a design to work with!
Or, you could always bring it by my place and I'd be happy to store it for you

[drinkingdog]

Finish your 3 inch boka get used to running it and then go from there.

[Danespirit]

Finish your 3 inch boka get used to running it and then go from there.

Yep

And when you enjoy the fruits of your labour with a good drop from your boka...you might consider using some of that nice copper for a VM build ?

[Prairiepiss]

Sit it in the corner. And hoard it. That's what I do anyway.

[cotton mouth Samson]

I like Mr ps answer that's what im going to do for now im going to get some kegs to hoard as well

[Truckinbutch]

I like Mr ps answer that's what im going to do for now im going to get some kegs to hoard as well

+1 on both ideas . You never get enough stock in your shop inventory That said ; I got a place to store that if it is in your way ........................

[cotton mouth Samson]

I added some more goodies to my hoard stash today
Has anyone seen a keg with 3 holes in it its got one on the top one on the bottom and one on the side the one on top seems to be the standard style connection

[multipazz]

need some help coming up with ideas for another build

looks like you got your keg for the boka....

why not take a look at the concentric plan

[toast860]

your a very lucky man. I wish I had that type of problem.build a pot still for stripping then use that in the boka

[salinenative]

Let me know if you want to unload one of those kegs !

[cotton mouth Samson]

I got them off swap shop on kmmo

[salinenative]

Actually I was just kidding. I heard someone looking on there and wondered if it was you! I don't think I'm quite ready for that large of a boiler yet. I'm working with an 8 gallon boiler and usually run a 6 gallon batch. That seems to work for me. . for now.

[cotton mouth Samson]

When you are ready for a larger boiler let me know I'll hold on to one for you