I built a turbo thumper

Many like to post about a first successful ferment (or first all grain mash), or first still built/bought or first good run of the still. Tell us about all of these great times here.
Pics are VERY welcome, we drool over pretty copper 8)

Moderator: Site Moderator

Post Reply
Ashton23L
Novice
Posts: 3
Joined: Sat Feb 01, 2014 6:16 pm

I built a turbo thumper

Post by Ashton23L »

I built a turbo thumper, I used the same basic idea as the actual one. I enlarged my condenser because I had extra 1 1/2" pipe left over. But my first water run came out with a greenish tinge and smells like hose water. I poured in 8 gallons but only ran about a quart to half gallon as it was getting late and I was initially checking for leaks. I don't know how to post a picture, but I'll try this afternoon. Any ideas?
Prairiepiss
retired
Posts: 16571
Joined: Sat Dec 18, 2010 7:42 am
Location: Somewhere in the Ozarks

Re: I built a turbo thumper

Post by Prairiepiss »

First read the must read new distiller reading lounge. There you will find cleaning procedures for a new still.

And I've already pmed you about the safety issues and pore design of that still.
But here it is again. For the open forum to see.
The glass jar is considered unsafe and to small to be used as a thumper.

The glass can explode from the heat and any cooling of it. This will throw high ABV alcohol everywhere. Possible fire ball. And a thumper needs to be 1/3 to 1/2 the boiler size. Otherwise it will fill up and puke out the takeoff. Smaller thumper need a drain back to the boiler. With a vapor lock. Which you can't do with a glass jar.

And stopping in the middle of a run to dump it. Is not the answer.

Don't know what you used to seal the jar. But getting it to seal with materials approved around here. Isn't that easy.

It's a craptastic design. From a crook. That many of us would just love to see disappear. Unfortunately it won't. So we are left trying to get people like you to see it is a bad and unsafe design. And most of the time are met with resistance saying we dont know what we are talking about. But this forum is all about distilling the best you can and as safe as you can. And this still does neither.
It'snotsocoldnow.

Advice For newbies by a newbie.
CM Still Mods
My Stuffs
Fu Man

Mr. Piss
That's Princess Piss to the haters.
User avatar
Halfbaked
retired
Posts: 3400
Joined: Mon Jan 21, 2013 5:51 pm

Re: I built a turbo thumper

Post by Halfbaked »

Is a turbo thumper one of those glass quart jar things?
User avatar
skow69
Master of Distillation
Posts: 3230
Joined: Tue Dec 06, 2011 3:03 am
Location: Cascadia

Re: I built a turbo thumper

Post by skow69 »

Sorry, but I gotta ask.
Ashton23L wrote:my first water run ... smells like hose water.
What did you expect it to smell like?
Distilling at 110f and 75 torr.
I'm not an absinthe snob, I'm The Absinthe Nazi. "NO ABSINTHE FOR YOU!"
OlympicMtDoo
Master of Distillation
Posts: 2544
Joined: Tue Feb 01, 2011 10:48 am
Location: Olympic Mountains USA

Re: I built a turbo thumper

Post by OlympicMtDoo »

stilldrinkin realmccoymoonshinestills rkhelp bluegrassmoonsh Here is a great thread, you could read for a month here about the amazing Turbo thumper and the fellas that make them but it should only take a day or two. Good luck
Sometimes I wonder why is that Frisbee getting bigger......and then it hits me.
Post Reply