I have a newly minted batch of pumpernickel rye that I am nuke aging prior to barreling. The white whiskey after cuts measures 63% ABV but after two nuke cycles it measures 57%. I am careful to keep the temp of spirit under 160F during the microwave sessions so I don't think I am cooking off the alcohol. I don't get it.
Has anyone else experienced this drop in ABV after nuking?
Nuke Aging and Proof Drop
Moderator: Site Moderator
-
Braz
- Distiller
- Posts: 1899
- Joined: Tue Jan 05, 2010 4:38 pm
- Location: Indiana, USA, Inc.
-
FullySilenced
- Distiller
- Posts: 1338
- Joined: Sun Dec 02, 2012 10:40 am
Re: Nuke Aging and Proof Drop
Some high end ethanols will evaporate... heat it then put the lid on tightly till it cools and goes into a vacuum state...
Just call the loss... the angels share...
happy stillin, and keep on nuking
FS
Just call the loss... the angels share...
happy stillin, and keep on nuking
FS
Do it Safely read The safety section: http://homedistiller.org/forum/viewforum.php?f=33
New Distillers Reading: http://homedistiller.org/forum/viewforum.php?f=46
Hookline's Basic Still Designs: http://homedistiller.org/forum/viewtopi ... =1&t=18873
New Distillers Reading: http://homedistiller.org/forum/viewforum.php?f=46
Hookline's Basic Still Designs: http://homedistiller.org/forum/viewtopi ... =1&t=18873
-
carbohydratesn
- Swill Maker
- Posts: 398
- Joined: Tue Jan 20, 2015 6:37 am
Re: Nuke Aging and Proof Drop
Doesn't matter if you are keeping it under 160, liquids do in fact evaporate below their boiling point.
-
FullySilenced
- Distiller
- Posts: 1338
- Joined: Sun Dec 02, 2012 10:40 am
Re: Nuke Aging and Proof Drop
read some more... some start at 145F
FS
FS
Do it Safely read The safety section: http://homedistiller.org/forum/viewforum.php?f=33
New Distillers Reading: http://homedistiller.org/forum/viewforum.php?f=46
Hookline's Basic Still Designs: http://homedistiller.org/forum/viewtopi ... =1&t=18873
New Distillers Reading: http://homedistiller.org/forum/viewforum.php?f=46
Hookline's Basic Still Designs: http://homedistiller.org/forum/viewtopi ... =1&t=18873
-
Bushman
- Admin
- Posts: 18346
- Joined: Tue Mar 30, 2010 5:29 am
- Location: Pacific Northwest
Re: Nuke Aging and Proof Drop
When I use my Ultra Sonic Cleaner for flavoring/aging I leave the lid on till it cools and haven't noticed a drop in either abv or through evaporation. I do have to say that it has been mostly an eyeball thing so next time I do it I will take closer readings in both areas.
-
Braz
- Distiller
- Posts: 1899
- Joined: Tue Jan 05, 2010 4:38 pm
- Location: Indiana, USA, Inc.
Re: Nuke Aging and Proof Drop
Thanks all. I've done the nuke thing a number of times but this is the first time I've checked the before/after proof. I do routinely cap the jars immediately and let the vacuum build. I like hearing the lids on the Ball jars pop. I will hold the peak temp down a bit on the next batch and see what happens.
Braz
-
NZChris
- Master of Distillation
- Posts: 13924
- Joined: Tue Apr 23, 2013 2:42 am
- Location: New Zealand
Re: Nuke Aging and Proof Drop
I thought 150f was the recommendation and that is the highest I've aimed for. My losses were never significant. I have had a microwave with a poorly aimed wave that spot heated the top of the jar, causing boiling. It went to the tip.