Another stripper, 25L/h 2" 2.5kW ;)
Posted: Fri Apr 15, 2022 10:48 am
Output abv at ~50%ABV with 25-30L/h @2.5kW
Bottom temp in column stable at around 99.8-99.9C
Sugar wash at ~10% input, feeding from the top
Depending on setup 25-30 plates with holes, 2" column.
No steamer, the spent wash is used in the boiler and overflows into the sink. We do use a bit of anti foaming agent.
Built by a friend of mine, design based on the russian strippers.
[utube][/utube]
[utube][/utube]
Overview:
Controller box, product exit cooler (from an alambiq) and pump Works like a charm, we use it about once a year. Up and running in about 6-7 minutes after power-on.The input sugar wash is cleared thoroughly and the low wines are redistilled in a boka with, as far as I'm concerned, very good results. Very clean and neutral, depending on how you run the boka, of course.
Bottom temp in column stable at around 99.8-99.9C
Sugar wash at ~10% input, feeding from the top
Depending on setup 25-30 plates with holes, 2" column.
No steamer, the spent wash is used in the boiler and overflows into the sink. We do use a bit of anti foaming agent.
Built by a friend of mine, design based on the russian strippers.
[utube][/utube]
[utube][/utube]
Overview:
Controller box, product exit cooler (from an alambiq) and pump Works like a charm, we use it about once a year. Up and running in about 6-7 minutes after power-on.The input sugar wash is cleared thoroughly and the low wines are redistilled in a boka with, as far as I'm concerned, very good results. Very clean and neutral, depending on how you run the boka, of course.