NZ stilling bits.
Moderator: Site Moderator
-
googe
- retired
- Posts: 3880
- Joined: Wed Jun 20, 2012 6:53 pm
- Location: awwstralian in new zealund
NZ stilling bits.
Hi all, I will be moving to Wellington area nz next year, I'm wanting to know some ruff prices of copper and fittings. Eg, how much would you Pay for 4' tube, per meter or length?. How much are Ferulle clamps?, I will be building another bubbler asap when I get over there and just want to know what I can expect. There seems to be a few kegs on trademe, so thats sorted.Any help would be great. thanks.
Here's to alcohol, the cause of, and solution to, all life's problems.
"Homer J Simpson"
"Homer J Simpson"
-
pounsfos
- Distiller
- Posts: 1131
- Joined: Sun Nov 13, 2011 1:46 am
- Location: lost in the bush with the rest of the kiwis
Re: NZ stilling bits.
Alot more than what you willpay over there.
Last time I checked 2' s/s pipe was going at roughly $26 a meter
check some online stores.
Last time I checked 2' s/s pipe was going at roughly $26 a meter
check some online stores.
-
googe
- retired
- Posts: 3880
- Joined: Wed Jun 20, 2012 6:53 pm
- Location: awwstralian in new zealund
Re: NZ stilling bits.
Thanks mate, appreciate the feed back. I'm after copper prices. I guess my best bet is just ringing some over there. Thought there was quite a few kiwis on this site, maybe not?.
Here's to alcohol, the cause of, and solution to, all life's problems.
"Homer J Simpson"
"Homer J Simpson"
-
1bottler
- Swill Maker
- Posts: 229
- Joined: Wed Aug 15, 2012 9:56 pm
- Location: Napier New Zealand
Re: NZ stilling bits.
I find building with stainless easier than working with copper, I use copper in the vapour stream. 
regards
Chris nz, where we don't have to still watching for the feds.~
Chris nz, where we don't have to still watching for the feds.~