Simple Pot still on keg build
Moderator: Site Moderator
-
copperlover1
- Swill Maker
- Posts: 250
- Joined: Mon Jan 06, 2014 8:59 am
Simple Pot still on keg build
Starting a simple pot still head on a keg build. 2"x12" copper. Easy flange. 2" cap with possible thermal well. 1/2" take off in 3/4" shell condenser (Liebig) . milled a 5/8" hole for my take off. No I am working on a jig to put a flange on a small pieces of 1/2" tubing so it will fit tight on the inside of the 2" pipe