Cheap Chinese Bubble Plate column Yay or Nay

Vapor, Liquid or Cooling Management. Flutes, plates, etc.

Moderator: Site Moderator

Post Reply
User avatar
squigglefunk
Distiller
Posts: 1010
Joined: Fri Jul 16, 2021 9:27 am

Cheap Chinese Bubble Plate column Yay or Nay

Post by squigglefunk »

https://www.ebay.com/itm/126746343008

sorry I know there's lots of reading to do but I trust the experts here and I know jack sheet about much of any of this. But I do want to get into trying a plate still someday from the descriptions I've read here but I'm poor and suck at fabrication lol. SO that brings me to this cheap chinese bubble plate column. I have read you want at least 4 to play with. Whelp, wat about this one? Thanks!
You do not have the required permissions to view the files attached to this post.
SW_Shiner
Distiller
Posts: 1002
Joined: Wed Feb 07, 2024 3:46 pm
Location: South Waikato, New Zealand

Re: Cheap Chinese Bubble Plate column Yay or Nay

Post by SW_Shiner »

Looks like one of those 'dropship' type deals. A lot of the same bits sold by different sellers. I cant offer any advise from that seller, but i have one that looks identical that i got off of aliexpress and ive had no issues with the quality of the parts after three years and many many runs.
(Edit: I have a 3" version)
tjsc5f
Swill Maker
Posts: 348
Joined: Sun Nov 28, 2021 9:18 pm
Location: MO, USA

Re: Cheap Chinese Bubble Plate column Yay or Nay

Post by tjsc5f »

Screenshot_20241113-152011.png
This is a trustworthy face for sure!
Price is good and the pics look like standard designs.

Personally, I would pay the extra $90 to buy from Oakstills, only because I know from past experience that their quality has exceeded my expectations.

https://oakstills.com/products/4-inch-4 ... ute-column
You do not have the required permissions to view the files attached to this post.
User avatar
Salt Must Flow
Master of Distillation
Posts: 3150
Joined: Sat Jan 29, 2022 2:06 pm
Location: Wuhan China (Novel Coronavirus Laboratory)

Re: Cheap Chinese Bubble Plate column Yay or Nay

Post by Salt Must Flow »

tjsc5f wrote: ↑Wed Nov 13, 2024 1:26 pm Screenshot_20241113-152011.png
This is a trustworthy face for sure!
Price is good and the pics look like standard designs.

Personally, I would pay the extra $90 to buy from Oakstills, only because I know from past experience that their quality has exceeded my expectations.

https://oakstills.com/products/4-inch-4 ... ute-column
+1 for Oak Stills. AND I bet they would quote you for swapping out the tees with sight glasses. I'd rather be able to see what's going on 360 degrees rather than through a little window.
ozark_jake
Novice
Posts: 24
Joined: Wed Oct 25, 2023 5:18 pm

Re: Cheap Chinese Bubble Plate column Yay or Nay

Post by ozark_jake »

Also note that the Oak Stills version has the two 90's connected with a tri-clamp at the top, allowing you to angle it away from your boiler. Maybe not worth 90 bucks on its own, but as others said they provide good quality and service.
User avatar
Tammuz
Rumrunner
Posts: 671
Joined: Sat Sep 21, 2024 11:59 am

Re: Cheap Chinese Bubble Plate column Yay or Nay

Post by Tammuz »

I just placed another order with Peter at oakstills. I have been ordering parts from him for over 2 years. I recommend their parts and Peter has the patience of a saint to deal with me.
I don't know how long this coupon's good for but it's 15% off . I just used today on my order. Welcome15
Igitur qui desiderat pacem, praeparet bellum or party till the cows come home!
User avatar
shadylane
Master of Distillation
Posts: 12864
Joined: Sat Oct 27, 2007 11:54 pm
Location: Hiding In the Boiler room of the Insane asylum

Re: Cheap Chinese Bubble Plate column Yay or Nay

Post by shadylane »

squigglefunk wrote: ↑Wed Nov 13, 2024 12:54 pm
I'm poor and suck at fabrication. SO that brings me to this cheap chinese bubble plate column. I have read you want at least 4 to play with. Whelp, wat about this one? Thanks!
At a glance, it looks like a good plug and play setup.
Before I say Yay or Nay, I'd have to see measurements on the cup depth and downcomer height, to guess at how good the hydraulics are going to be. Some of the designs on the market use the same cap turned upside down for a downcomer. This can cause problems because the downcomer cup that holds liquid isn't deep enough to stop vapor from blowing upwards and bypass the bubble caps.

On a side note and not wanting to hijack.
I'd recommend not having the cooling water plumbed in series like in the pic.
Having the cooling water flow separated, so a needle valve can control the dephleg water is better.
User avatar
squigglefunk
Distiller
Posts: 1010
Joined: Fri Jul 16, 2021 9:27 am

Re: Cheap Chinese Bubble Plate column Yay or Nay

Post by squigglefunk »

the coupon code does work, thanks!

check this one on oak stills, a perf plate as opposed to the bubble plate, with a few less things I don't really need with coupon $436

do the perf and bubble plates produce similar results?

https://oakstills.com/products/4-stainl ... ted-plates
You do not have the required permissions to view the files attached to this post.
User avatar
higgins
Trainee
Posts: 782
Joined: Tue Sep 15, 2020 5:16 am
Location: US Southern Appalachia

Re: Cheap Chinese Bubble Plate column Yay or Nay

Post by higgins »

I built my 4" flute from parts ordered from Oak Stills, using 4" inline sight glasses.

Image

I made 3 plate sections, but rarely use more than 2 for rum and whiskey. I like being able to see the plate action from any angle rather than having to peer into a 3" port.

The parts cost with shipping was about $75 per plate, but that includes the two 4x2 reducers, and DOES NOT INCLUDE a dephlegmator. I made a 2" x 10" dimroth dephleg that works great.

The only 'fabrication' was drilling the holes in my sieve plates, cutting the downcomers to length, soldering in the downcomers with cups, and wrapping the sight glass gaskets with PTFE.

Parts list & sources for my 4" 3 sieve plate column
User avatar
squigglefunk
Distiller
Posts: 1010
Joined: Fri Jul 16, 2021 9:27 am

Re: Cheap Chinese Bubble Plate column Yay or Nay

Post by squigglefunk »

higgins wrote: ↑Thu Nov 14, 2024 5:16 am I built my 4" flute from parts ordered from Oak Stills, using 4" inline sight glasses.

Image

I made 3 plate sections, but rarely use more than 2 for rum and whiskey. I like being able to see the plate action from any angle rather than having to peer into a 3" port.

The parts cost with shipping was about $75 per plate, but that includes the two 4x2 reducers, and DOES NOT INCLUDE a dephlegmator. I made a 2" x 10" dimroth dephleg that works great.

The only 'fabrication' was drilling the holes in my sieve plates, cutting the downcomers to length, soldering in the downcomers with cups, and wrapping the sight glass gaskets with PTFE.

Parts list & sources for my 4" 3 sieve plate column
your plate looks totally different than the one from oak stills, I wonder how theirs works in comparison. theirs looks to have very short "downcomer" (I think thats the term)

I see a few mention about being able to see the product in 360° with sight glass columns. ARE they different than packed reflux columns where insulating the column is better for the operation? I was figuring on wrapping and leaving just the sight glass windows open.

In the end it seems like I could get the one from oak stills with all the additional pieces for about $150 more with free shipping. Makes it seem even more of a bargain lol and zero fabrication which is good for my stress levels lol.

But how the oak stills one works is another question obviously. I have ordered from them long ago and it wasn't a great product, I ended up returning it (a dephlegmator), but I don't think they really make anything, I think this is more of a reseller, and I'd be willing to give it another go. They did handle the return well. (I think it was thru ebay tho, that may have helped)

Thanks to everyone for their input, it helps greatly and I won't go buying shtuff without y'all now heheh.
User avatar
Rusty Ole Bucket
Posts: 667
Joined: Sat Jul 27, 2024 12:39 pm
Location: Well, I'm not sure.

Re: Cheap Chinese Bubble Plate column Yay or Nay

Post by Rusty Ole Bucket »

squigglefunk wrote: ↑Thu Nov 14, 2024 6:37 am Thanks to everyone for their input, it helps greatly and I won't go buying shtuff without y'all now heheh.
That's an important lesson I learned early on too. :lol:

Rusty
"Knowledge is a paradox; the more one understands, the more one realizes the vastness of his ignorance" - Viktor (Arcane)

The Horny Goat Build
Electric Boozaloo II Build
Post Reply