Introductory Post

[Riverboat86]

Hello everyone. I’ve been following this forum for a little over a year and I finally feel like I have enough experience to start commenting a little bit. I’m also excited to bounce ideas off everyone.

Still setup: mile high 8 gallon 3” torpedo pro

-Riverboat

[subbrew]

Welcome. What are you making?

[Riverboat86]

Welcome. What are you making?

Started with mostly sugar wash for about 3-4 months to get the feel for everything. Since then I’ve been getting into AG whiskey and trying different mashes and additives. Mostly just experimenting.

[subbrew]

Started with mostly sugar wash for about 3-4 months to get the feel for everything. Since then I’ve been getting into AG whiskey and trying different mashes and additives. Mostly just experimenting.

[Rusty Ole Bucket]

Welcome to HD! Dive in and have fun.

Rusty

[Riverboat86]

Welcome to HD! Dive in and have fun.

Rusty

Thank you, looking forward to it!

[Yummyrum]

Welcome to the forum Riverboat .
Once you start experimenting with grain fermentations , make sure you strain before you fill the boiler . Some of those smaller stills have smaller tubing in the condensers that can potentially block

[Riverboat86]

Welcome to the forum Riverboat .
Once you start experimenting with grain fermentations , make sure you strain before you fill the boiler . Some of those smaller stills have smaller tubing in the condensers that can potentially block

Thank you! I do have an internal heating element so I pretty much have to strain and clear everything right now for that too.

[Yummyrum]

Edit : sorry that still is not the one I was thinking if , you’ll be right