Page 1 of 1
Introductory Post
Posted: Fri Jan 10, 2025 11:31 am
by Riverboat86
Hello everyone. I’ve been following this forum for a little over a year and I finally feel like I have enough experience to start commenting a little bit. I’m also excited to bounce ideas off everyone.
Still setup: mile high 8 gallon 3” torpedo pro
-Riverboat
Re: Introductory Post
Posted: Fri Jan 10, 2025 12:32 pm
by subbrew
Welcome. What are you making?
Re: Introductory Post
Posted: Fri Jan 10, 2025 12:34 pm
by Riverboat86
subbrew wrote: ↑Fri Jan 10, 2025 12:32 pm
Welcome. What are you making?
Started with mostly sugar wash for about 3-4 months to get the feel for everything. Since then I’ve been getting into AG whiskey and trying different mashes and additives. Mostly just experimenting.
Re: Introductory Post
Posted: Fri Jan 10, 2025 12:55 pm
by subbrew
Riverboat86 wrote: ↑Fri Jan 10, 2025 12:34 pm
Started with mostly sugar wash for about 3-4 months to get the feel for everything. Since then I’ve been getting into AG whiskey and trying different mashes and additives. Mostly just experimenting.
![Thumbup :thumbup:](./images/smilies/icon_thumbup.gif)
Re: Introductory Post
Posted: Fri Jan 10, 2025 1:07 pm
by Rusty Ole Bucket
Welcome to HD! Dive in and have fun.
Rusty
Re: Introductory Post
Posted: Fri Jan 10, 2025 1:14 pm
by Riverboat86
Rusty Ole Bucket wrote: ↑Fri Jan 10, 2025 1:07 pm
Welcome to HD! Dive in and have fun.
Rusty
Thank you, looking forward to it!
Re: Introductory Post
Posted: Fri Jan 10, 2025 2:10 pm
by Yummyrum
Welcome to the forum Riverboat .
Once you start experimenting with grain fermentations , make sure you strain before you fill the boiler . Some of those smaller stills have smaller tubing in the condensers that can potentially block
Re: Introductory Post
Posted: Fri Jan 10, 2025 2:12 pm
by Riverboat86
Yummyrum wrote: ↑Fri Jan 10, 2025 2:10 pm
Welcome to the forum Riverboat .
Once you start experimenting with grain fermentations , make sure you strain before you fill the boiler . Some of those smaller stills have smaller tubing in the condensers that can potentially block
Thank you! I do have an internal heating element so I pretty much have to strain and clear everything right now for that too.
Re: Introductory Post
Posted: Fri Jan 10, 2025 2:13 pm
by Yummyrum
Edit : sorry that still is not the one I was thinking if , you’ll be right