Cork: Difference between revisions

From Distillers Wiki
Jump to navigation Jump to search
(Creating page)
 
m (Minor edits)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
[[Bottle]] closure made from the bark of cork oaks (''Quercus Suber''). Quality corks have very fine [[Grain|grain]], only minor or no faults, good compressability, and have been cured to contain between 5 and 8% moisture.
[[file:cork.jpg|thumb|140px|right|Typical Cork]]
[[Bottle]] closure made from the bark of cork oaks (''Quercus Suber''). Quality corks have very fine [[grain]], only minor or no faults, good compressability, and have been cured to contain between 5 and 8% moisture.


If you are looking to use a cork to close your [[Bottle|bottles]], slightly used [[Wine|wine]] corks can be made into great [[Spirit|spirit]] corks. Corks from a hardware store can be a bit overpriced (~$0.30-$0.50US). Its easy to turn a wine cork into a spirit by cutting the cork in half lengthwise and then tapering down one end. A straight razor or pocket knife is often the ideal tool for the job.
If you are looking to use a cork to close your [[bottle]]s, slightly used [[wine]] corks can be made into great [[spirit]] corks. Corks from a hardware store can be a bit overpriced (~$0.30-$0.50US). Its easy to turn a wine cork into a spirit by cutting the cork in half lengthwise and then tapering down one end. A straight razor or pocket knife is often the ideal tool for the job.


[[Category:Equipment]]
[[Category:Equipment]]
[[Category:Glossary]]
[[Category:Glossary]]

Latest revision as of 10:29, 8 October 2017

Typical Cork

Bottle closure made from the bark of cork oaks (Quercus Suber). Quality corks have very fine grain, only minor or no faults, good compressability, and have been cured to contain between 5 and 8% moisture.

If you are looking to use a cork to close your bottles, slightly used wine corks can be made into great spirit corks. Corks from a hardware store can be a bit overpriced (~$0.30-$0.50US). Its easy to turn a wine cork into a spirit by cutting the cork in half lengthwise and then tapering down one end. A straight razor or pocket knife is often the ideal tool for the job.